CPI Safety Standards & Regulations 3

Question 1

Which ANSI/ISEA standard specifies requirements for high-visibility safety apparel (HVSA) worn by workers near traffic?

Accepted Answer

ANSI/ISEA 107

Answer

ANSI/ISEA 107 establishes performance requirements for high-visibility safety apparel and headwear.

Question 2

A CPI installer discovers that a conduit run will pass through a fire-rated wall. What is required at the penetration point?

Accepted Answer

A listed firestop system that maintains the wall's fire rating

Answer

NEC and building codes require a listed firestop system to restore the fire-resistance rating of any penetrated fire-rated assembly.

Question 3

According to OSHA, which personal protective equipment (PPE) is required when working with materials that produce dust above the permissible exposure limit (PEL)?

Accepted Answer

A filtering facepiece respirator rated at minimum N95

Answer

An N95 or higher NIOSH-approved respirator is required when airborne dust concentrations exceed OSHA's PEL.

Question 4

What is the purpose of a 'toolbox talk' in a CPI work environment?

Accepted Answer

To conduct a brief safety meeting focused on daily hazards

Answer

A toolbox talk is a short, informal safety meeting held on the job site to discuss specific hazards relevant to that day's work.

Question 5

When using a powder-actuated tool (PAT) to fasten materials, which safety requirement applies?

Accepted Answer

Operators must be trained and the tool must not be loaded until ready to use

Answer

OSHA requires PAT operators to be trained/certified, and tools must remain unloaded until immediately before use to prevent accidental discharge.

(CPI) Certified Professional Installer Practice Test

(CPI) Certified Professional Installer Practice Test

CPI Safety Standards & Regulations 3