Equipment Maintenance & Sanitation Flashcards

How often should clipper blades be oiled during a full grooming session?

Answer: After every 10-15 minutes of use

Clipper blades should be oiled every 10-15 minutes of use to reduce friction, prevent overheating, and maintain cutting efficiency.

Which solution is most appropriate for disinfecting grooming scissors between clients?

Answer: Isopropyl alcohol (70%)

70% isopropyl alcohol effectively kills pathogens on scissor blades and evaporates quickly without causing rust damage.

What is the primary reason for 'carding' a grooming table's rubber mat regularly?

Answer: To remove embedded hair and debris that harbor bacteria

Carding or scrubbing the rubber mat removes embedded hair and organic debris that can harbor bacteria and mold.

A groomer notices rust spots forming on clipper blades after cleaning. What is the most likely cause?

Answer: Inadequate drying after washing or disinfecting

Rust develops when moisture remains on metal surfaces after washing; blades must be thoroughly dried immediately after cleaning.

What does the term 'blade drive' refer to in clipper maintenance?

Answer: The mechanism that moves the cutting blade back and forth

The blade drive is the component inside the clipper that transfers motor movement to the reciprocating cutting blade.

Which type of cleaner should be AVOIDED on high-carbon steel shear blades?

Answer: Chlorine bleach solutions

Chlorine bleach is highly corrosive to high-carbon steel and will cause pitting and rust, permanently damaging the blade edges.

When should a groomer replace a clipper drive cap (also called a comb drive)?

Answer: When it shows visible wear, cracking, or causes blade chatter

A worn or cracked drive cap causes blade chatter, uneven cutting, and excess heat, and should be replaced when these symptoms appear.