CompTIA Network+ Wireless Networking Standards Questions and Answers 1

Question 1

A network administrator is designing a wireless network for a high-density environment with many simultaneous users, such as a lecture hall. To improve efficiency and reduce latency, the administrator wants to use a technology that allows an access point to communicate with multiple devices at the same time by dividing a Wi-Fi channel into smaller sub-channels. Which 802.11ax feature enables this capability?

Accepted Answer

OFDMA

Answer

Orthogonal Frequency-Division Multiple Access (OFDMA) is a key feature of the 802.11ax (Wi-Fi 6) standard. It enhances efficiency in dense environments by subdividing a wireless channel into smaller resource units (RUs), allowing an access point to transmit data to and from multiple clients simultaneously within the same transmission window. [1, 2, 4, 8, 9] This reduces contention and latency, which is ideal for scenarios with many users and small data packets. [1, 4]

Question 2

A technician is upgrading a company's wireless infrastructure to 802.11ac. They have purchased new access points that are 'Wave 2' certified. Which of the following features is a key advantage of 802.11ac Wave 2 over Wave 1?

Accepted Answer

Support for Multi-User MIMO (MU-MIMO)

Answer

A significant enhancement introduced with the 802.11ac Wave 2 standard is support for Multi-User MIMO (MU-MIMO). [3, 6, 14] This technology allows an access point to transmit data to multiple client devices simultaneously, which improves overall network throughput and efficiency compared to the Single-User MIMO (SU-MIMO) used in Wave 1. [6, 11, 14]

Question 3

A user's laptop is equipped with an 802.11g wireless adapter. The user is connecting to a newer 802.11n access point. Which of the following statements BEST describes the expected behavior?

Accepted Answer

The laptop will connect and operate at the maximum 802.11g speed, without impacting 802.11n clients on the same network.

Answer

The 802.11n standard is backward compatible with 802.11b and 802.11g. An 802.11g device can connect to an 802.11n access point, but it will be limited to the maximum data rate of the 802.11g standard (54 Mbps). [19, 21] While older standards like 802.11b could slow down an entire 802.11g network, 802.11n access points are designed to handle mixed-mode environments more gracefully, allowing 802.11n clients to operate at their higher speeds while simultaneously serving the legacy 802.11g client. [21]

Question 4

Which wireless standard was the first to introduce Multiple-Input Multiple-Output (MIMO) and supported operation in both the 2.4 GHz and 5 GHz frequency bands?

Accepted Answer

802.11n

Answer

The IEEE 802.11n standard, also known as Wi-Fi 4, was the first to introduce MIMO technology, which uses multiple antennas to improve range and throughput. [15, 16, 17] It was also designed to operate in both the 2.4 GHz and 5 GHz frequency bands, offering greater flexibility and backward compatibility with 802.11b/g devices. [12, 20]

Question 5

A network engineer is selecting a wireless standard for a new office deployment and wants to avoid the crowded 2.4 GHz frequency band, which is subject to interference from microwaves, cordless phones, and Bluetooth devices. Which of the following legacy standards operates exclusively in the 5 GHz band?

Accepted Answer

802.11a

Answer

The 802.11a standard operates exclusively in the 5 GHz frequency band. [18, 19, 21] This gives it the advantage of operating in a less congested spectrum compared to the 2.4 GHz band used by 802.11b and 802.11g, resulting in less interference. [13, 19]

CompTIA Practice Test

CompTIA Practice Test

CompTIA Network+ Wireless Networking Standards Questions and Answers 1