← All CNOR Flashcard Decks

Environmental Hazards and Safety in the OR Flashcards

7 cards from real CNOR practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Environmental Hazards and Safety in the OR flashcards as text
  1. Why is single-use protective eyewear for a laser procedure chosen based on the laser being used?

    Answer: Eyewear must have an optical density rated for that laser's specific wavelength

    Laser eyewear only protects against the wavelengths it is rated for, so its optical density must match the laser's wavelength.

  2. Which is the correct way to protect the endotracheal tube during a laser procedure on the airway?

    Answer: Use a laser-resistant tube and fill the cuff with saline colored with methylene blue

    A laser-resistant tube with a saline-filled, dyed cuff resists ignition and shows quickly if the cuff is punctured.

  3. What is the nominal hazard zone (NHZ) in laser safety?

    Answer: The space where direct, reflected, or scattered laser radiation exceeds the maximum permissible exposure

    Inside the NHZ, laser exposure can go above safe limits, so everyone there needs proper eye protection.

  4. Which practice helps prevent laser beam reflection injuries?

    Answer: Using instruments with anodized, ebonized, or brushed finishes

    Dull, non-reflective finishes scatter the beam instead of sending it back at full strength toward staff or tissue.

  5. Who should usually control the laser's standby/ready mode during a laser procedure?

    Answer: The surgeon using the laser

    Only the person using the laser should activate it, and it goes back to standby whenever it is not aimed at the target.

  6. What should be posted on every entrance to a room where a laser is in use?

    Answer: A wavelength-specific laser warning sign

    Laser warning signs at each entrance tell people about the hazard and the eye protection they need before entering.

  7. Why must wet sponges or towels be kept near the target area during laser surgery?

    Answer: To lower the risk of fire by absorbing stray laser energy

    Moist materials absorb stray beam energy and help keep drapes and other fuels around the target from catching fire.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. cc-institute.org — Test delivery, eligibility, score release, test dates, score validity, exam information · verified Oct 2026