Mold Inspection Standards & Reporting Practices Flashcards

Which ASTM standard specifically addresses the assessment of fungal growth in buildings?

Answer: ASTM D7338

ASTM D7338 is the Standard Guide for Assessment of Fungal Growth in Buildings.

When documenting moisture intrusion in a mold inspection report, what measurement should always be recorded alongside the moisture reading?

Answer: Ambient temperature and relative humidity

Ambient temperature and relative humidity must accompany moisture readings because they affect the interpretation of moisture meter data.

According to IICRC S520, what is the primary purpose of a mold remediation protocol?

Answer: To establish scope, methods, and clearance criteria for remediation

The IICRC S520 defines a remediation protocol as a document establishing scope, methods, and clearance criteria.

What is the minimum information that must appear on a bulk sample label for chain of custody purposes?

Answer: Sample number, location, date, and collector's initials

Proper chain of custody requires at minimum sample number, collection location, date, and the collector's initials.

In an inspection report, an 'area of concern' differs from a 'confirmed mold condition' because:

Answer: An area of concern shows suspicious signs but lacks laboratory confirmation

An area of concern indicates suspicious signs (staining, odor, moisture) without yet having laboratory confirmation of mold.

Which section of a mold inspection report typically contains the inspector's qualifications and limitations of the inspection?

Answer: Scope of Work and Limitations

The Scope of Work and Limitations section defines what was and was not inspected, and lists the inspector's credentials.

When a mold inspection report includes photographs, what information should accompany each photo?

Answer: Caption, location reference, and date/time stamp

Photos must include a caption describing what is shown, a location reference, and a date/time stamp to be useful documentation.