CME Regulatory Compliance & Standards 2

Question 1

Under OSHA's Bloodborne Pathogens Standard (29 CFR 1910.1030), electrologists must offer the hepatitis B vaccine to employees at risk of occupational exposure within how many days of initial assignment?

Accepted Answer

10 working days

Answer

OSHA requires employers to offer the HBV vaccine series within 10 working days of initial assignment to tasks involving occupational exposure.

Question 2

Which regulatory body specifically governs the licensure and scope of practice for electrologists in states that have dedicated electrology practice acts?

Accepted Answer

State boards of cosmetology or dedicated electrology boards

Answer

Electrology licensure and scope of practice are regulated at the state level by cosmetology boards or dedicated electrology boards, not federal agencies.

Question 3

When disposing of used needles from an electrology session, what type of container is federally required?

Accepted Answer

An FDA-cleared sharps disposal container

Answer

OSHA and EPA regulations require used sharps to be placed immediately in FDA-cleared, puncture-resistant, leak-proof sharps containers.

Question 4

A client requests copies of their treatment records. Under HIPAA, the covered entity must provide access within how many days of the request?

Accepted Answer

30 days

Answer

HIPAA's Access Rule requires covered entities to provide access to requested records within 30 days, with one 30-day extension if needed.

Question 5

Which of the following best describes the purpose of a written Exposure Control Plan under OSHA's Bloodborne Pathogens Standard?

Accepted Answer

To document how the employer will eliminate or minimize employee exposure to bloodborne pathogens

Answer

An Exposure Control Plan is a written document required by OSHA that identifies tasks with exposure risk and details protective measures and procedures.

(CME) Certified Medical Electrologist Practice Test

(CME) Certified Medical Electrologist Practice Test

CME Regulatory Compliance & Standards 2