CMC - Certified Marine Chemist NFPA 306 Standard Application Questions and Answers 1

Question 1

A Marine Chemist is called to a vessel to certify a fuel oil tank for hot work. The tank was previously cleaned. According to NFPA 306, what is the minimum standard safety designation required on the certificate for hot work to proceed inside this tank?

Accepted Answer

SAFE FOR HOT WORK

Answer

NFPA 306 requires the specific designation 'SAFE FOR HOT WORK' for any space where hot work is to be conducted. This designation confirms that the space has been cleaned and tested to ensure flammable vapors are below 10% of the Lower Explosive Limit (LEL), combustible residues have been removed, and adjacent spaces are secure. While it must also be safe for workers, the 'SAFE FOR HOT WORK' designation is the explicit requirement for this activity.

Question 2

A shipyard is performing repairs on a vessel that last carried a flammable liquid cargo. Which of the following situations would, according to NFPA 306, absolutely require the issuance of a Marine Chemist's Certificate before proceeding?

Accepted Answer

Welding on a pipeline that is connected to a cargo tank.

Answer

NFPA 306, along with OSHA and USCG regulations, mandates a Marine Chemist's Certificate for hot work in, on, or adjacent to spaces that have contained flammable or combustible liquids or gases. This explicitly includes pipelines, heating coils, or other fittings connected to such spaces. The other activities, while requiring general safety precautions, do not fall under the specific mandate for a Marine Chemist certificate unless they directly involve or are adjacent to the hazardous spaces.

Question 3

When preparing a Marine Chemist's Certificate, which of the following is a critical piece of information that must be included as per NFPA 306 requirements?

Accepted Answer

The name and contact number of the Marine Chemist.

Answer

Recent editions of NFPA 306 have added the requirement that the Marine Chemist's name and a contact number must be included on the certificate. This ensures that the chemist can be contacted if conditions change that might affect the safety of the work authorized by the certificate.

Question 4

A tank on a vessel is to be rendered safe for hot work entirely by inerting. According to NFPA 306, if a space is designated as 'INERTED', what other designation must it also receive?

Accepted Answer

NOT SAFE FOR WORKERS

Answer

NFPA 306 mandates that if a space is designated as 'INERTED', it must also be designated as 'NOT SAFE FOR WORKERS'. This is because the inert gas displaces oxygen to a level below that which can support life, creating a hazardous atmosphere for personnel entry even though it is safe from a flammability standpoint.

Question 5

According to the scope of NFPA 306, the standard applies to which of the following scenarios?

Accepted Answer

Land-side storage tanks located within the boundaries of a shipyard.

Answer

The scope of NFPA 306 explicitly includes vessels during construction, repair, and shipbreaking, as well as land-side confined spaces (stationary or mobile) located within the boundaries of a shipyard or vessel repair facility.

(CMC) Certified Marine Chemist Practice Test

(CMC) Certified Marine Chemist Practice Test

CMC - Certified Marine Chemist NFPA 306 Standard Application Questions and Answers 1