CLD Sustainable & Energy-Efficient Lighting Solutions 4

Question 1

Which color temperature range (CCT) is generally recommended for outdoor street lighting to minimize impact on wildlife and nocturnal ecosystems?

Accepted Answer

Below 3000K (warm white or amber)

Answer

Warm-white or amber LEDs (≤3000K, ideally narrowband amber) emit less short-wavelength blue light, which is most disruptive to circadian rhythms of wildlife and humans.

Question 2

What does 'lighting power density' (LPD) express, and how is it used in energy compliance?

Accepted Answer

Installed watts per square foot; compared against ASHRAE 90.1 allowances

Answer

LPD (W/ft²) measures installed lighting wattage relative to floor area and must not exceed ASHRAE 90.1 space-by-space or whole-building allowances for energy code compliance.

Question 3

A CLD proposes replacing 400W metal halide high-bay fixtures with LED high-bays in a warehouse. Which calculation confirms the energy savings are real and not offset by overlighting?

Accepted Answer

Verify the new LPD is below code maximum and illuminance levels match the IES RP target

Answer

Comparing the new LPD to code limits and the resulting illuminance to IES recommended levels confirms energy reduction without sacrificing or exceeding the required light levels.

Question 4

In sustainable lighting design, 'adaptive lighting' in a smart city context most commonly refers to:

Accepted Answer

Automatically adjusting street light levels based on real-time traffic, pedestrian presence, or time of night

Answer

Adaptive street lighting uses sensors or networked control to dim or brighten luminaires in response to actual activity, reducing energy use during low-traffic periods.

Question 5

What is the purpose of an 'occupancy sensor dead band' setting in an energy-efficient lighting control system?

Accepted Answer

A time delay before lights turn off after the last detected motion, preventing nuisance switching

Answer

The time-delay (dead band) after last detection prevents lights from cycling off and on rapidly when occupants are briefly still, balancing comfort and energy savings.

(CLD) Certified Lighting Designer Practice Test

(CLD) Certified Lighting Designer Practice Test

CLD Sustainable & Energy-Efficient Lighting Solutions 4