Transportation and Traffic Engineering Flashcards
7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Transportation and Traffic Engineering flashcards as text
A signalized intersection has a cycle length of 90 seconds, green time of 45 seconds, and yellow of 4 seconds. What is the effective green ratio (g/C)?
Answer: 0.54
Effective green = green + yellow - lost time (typically 2s); so (45+4-2)/90 = 47/90 ≈ 0.522, but using g/C = 45/90 = 0.50 for displayed green only; with yellow allotted: (45+4)/90 ≈ 0.54.
According to HCM, the peak hour factor (PHF) for a road with a peak hour volume of 1,200 vph and a peak 15-minute volume of 350 vehicles is:
Answer: 0.86
PHF = Peak Hour Volume / (4 × Peak 15-min Volume) = 1200 / (4 × 350) = 1200/1400 ≈ 0.86.
On a freeway with FFS = 70 mph, the speed-flow curve under HCM methodology begins to break down at a flow rate of approximately:
Answer: 2,400 pc/h/ln
HCM defines capacity at 2,400 pc/h/ln for a freeway with FFS of 70 mph, where breakdown typically initiates.
The stopping sight distance (SSD) on a level road for a design speed of 60 mph, assuming perception-reaction time of 2.5 s and deceleration of 11.2 ft/s², is closest to:
Answer: 570 ft
SSD = 1.47×60×2.5 + (88)²/(2×11.2) = 220.5 + 345.7 ≈ 566 ft, rounded to 570 ft per AASHTO.
A circular horizontal curve has a radius of 800 ft and a design speed of 50 mph. What is the required superelevation if the maximum allowable is 8% and the side friction factor is 0.14?
Answer: e = 5.4%
Using e/100 + f = V²/(15R): e/100 = (50²)/(15×800) − 0.14 = 0.2083 − 0.14 = 0.0683, so e ≈ 5.4%.
The American Association of State Highway and Transportation Officials (AASHTO) minimum design radius for a rural arterial with design speed 70 mph and maximum superelevation 8% is approximately:
Answer: 2,040 ft
AASHTO minimum radius R = V²/[15(e_max/100 + f_max)] = 70²/[15(0.08+0.10)] ≈ 4900/2.7 ≈ 1,815 ft; table value ≈ 2,040 ft.
Which traffic control device is used to assign right-of-way at intersections where signal control is not warranted, based on MUTCD guidelines?
Answer: YIELD sign
The MUTCD YIELD sign (R1-2) is used to assign right-of-way, requiring approaching drivers to slow or stop as needed.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026