← All Civil Engineering PE Flashcard Decks

Steel Structure Design Methods Flashcards

7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Steel Structure Design Methods flashcards as text
  1. In LRFD design, which load combination governs for a steel beam subjected to dead load D = 20 kips and live load L = 40 kips?

    Answer: 1.2D + 1.6L = 88 kips

    AISC LRFD load combination 1.2D + 1.6L = 1.2(20) + 1.6(40) = 88 kips governs over 1.4D = 28 kips.

  2. What does the resistance factor φ = 0.90 represent in LRFD steel design for tension yielding?

    Answer: A safety margin accounting for variability in material strength and fabrication

    φ = 0.90 for tension yielding represents the probability-based reduction accounting for material and fabrication variability to ensure adequate reliability.

  3. A W-shape beam has a plastic section modulus Zx = 120 in³ and Fy = 50 ksi. What is the plastic moment Mp?

    Answer: 6,000 kip-in

    Mp = Fy × Zx = 50 ksi × 120 in³ = 6,000 kip-in.

  4. In ASD for steel, the allowable bending stress Fb for a compact section in a braced frame with Fy = 36 ksi is typically:

    Answer: 0.66Fy = 23.76 ksi

    ASD allowable bending stress for compact laterally braced beams is Fb = 0.66Fy per AISC 9th edition.

  5. Which steel design method explicitly accounts for the probability of failure through reliability index β?

    Answer: LRFD

    LRFD was calibrated using reliability theory to achieve a target reliability index β ≈ 3.0 for typical members.

  6. For a tension member, AISC LRFD requires checking two limit states. Which pair is correct?

    Answer: Yielding on gross area and fracture on net area

    AISC requires φPn for both gross-section yielding (φ=0.90, Pn=FyAg) and net-section fracture (φ=0.75, Pn=FuAeU).

  7. In steel design, the shear factor of safety in ASD is typically set at approximately:

    Answer: 1.67 (Fv = 0.40Fy)

    ASD allowable shear stress is Fv = 0.40Fy, corresponding to a safety factor of about 1.67 against shear yielding.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026