← All Civil Engineering PE Flashcard Decks

Soil Mechanics and Lab Testing Flashcards

7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Soil Mechanics and Lab Testing flashcards as text
  1. A soil has a shrinkage limit (SL) of 12%, plastic limit (PL) of 22%, and liquid limit (LL) of 48%. What is the shrinkage ratio if the soil volume at the shrinkage limit is 24.5 cm³ and dry mass is 36 g, using γw = 1 g/cm³?

    Answer: 1.47

    Shrinkage ratio SR = Ms/(Vs × γw) = 36/(24.5 × 1.0) = 1.47 g/cm³.

  2. In geotechnical engineering, what is the significance of the preconsolidation pressure (σ'c) determined from a consolidation test?

    Answer: It marks the stress boundary between recompression and virgin compression behavior

    Preconsolidation pressure separates the lightly (elastic) recompression range from the normally consolidated (plastic) compression range on the e-log p curve.

  3. A saturated soil specimen in an unconsolidated-undrained (UU) triaxial test shows zero friction angle (φ = 0). If the unconfined compressive strength (qu) is 80 kPa, what is the undrained shear strength (su)?

    Answer: 40 kPa

    For φu = 0, su = cu = qu/2 = 80/2 = 40 kPa; the Mohr circle radius equals the shear strength.

  4. A sand has a maximum void ratio of 0.82 and minimum void ratio of 0.45. A field sample has a void ratio of 0.60. What is the relative density (Dr)?

    Answer: 59.5%

    Dr = (emax − e)/(emax − emin) × 100 = (0.82 − 0.60)/(0.82 − 0.45) × 100 = 0.22/0.37 × 100 ≈ 59.5%.

  5. Which index property best distinguishes between a silty soil (ML or MH) and a clayey soil (CL or CH) in the USCS classification system?

    Answer: Position relative to the A-line on the plasticity chart

    The A-line (U = 0.73(LL − 20)) on the Casagrande plasticity chart separates clays (above) from silts and organic soils (below).

  6. In a sieve analysis, what percentage of soil passes the No. 200 sieve if the retained amounts are: No. 4 = 15 g, No. 10 = 25 g, No. 40 = 35 g, No. 200 = 45 g, and pan = 30 g from a total dry mass of 150 g?

    Answer: 20%

    Mass passing No. 200 = pan fraction = 30 g; percent passing = 30/150 × 100 = 20%.

  7. A compaction curve shows optimum moisture content (OMC) at 15%. A contractor compacts soil at 12% moisture. Compared to the dry side of optimum, what is the most significant engineering implication?

    Answer: Higher strength and stiffness but more brittle and susceptible to collapse upon wetting

    Compaction dry of optimum produces a flocculated structure with higher strength but more collapse potential when saturated, compared to the dispersed, more ductile wet-side structure.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026