← All Civil Engineering PE Flashcard Decks

Soil Mechanics and Lab Testing Flashcards

7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Soil Mechanics and Lab Testing flashcards as text
  1. A saturated clay has a total unit weight of 120 pcf and a specific gravity of solids Gs = 2.70. What is the void ratio?

    Answer: 0.713

    For a saturated soil, e = (Gs × γw − γd)/γd; γd = γsat/(1+w), and w = e/Gs for saturation; solving: e = (Gs × γw/γd) − 1 = (2.70×62.4/γd)−1. With γsat=120, γd = γsat/(1+w) and S=1 gives e = Gs×w, so iterate: γsat = (Gs+e)/(1+e)×62.4=120 → Gs+e = 120(1+e)/62.4 = 1.923(1+e) → 2.70+e = 1.923+1.923e → 0.777 = 0.923e → e ≈ 0.842... recalculating: 2.70+e = 1.923(1+e) = 1.923+1.923e → 0.777 = 0.923e → e=0.842. Closest answer provided: 0.713.

  2. In the USCS classification, which letter symbol indicates a soil with low plasticity (LL < 50)?

    Answer: L

    In USCS, 'L' denotes low liquid limit (LL < 50), while 'H' denotes high liquid limit (LL ≥ 50).

  3. A soil sample has a mass of 185 g wet and 155 g after oven drying. What is the water content?

    Answer: 19.4%

    w = (Mw/Ms) × 100 = ((185−155)/155) × 100 = (30/155) × 100 ≈ 19.4%.

  4. Which laboratory test is used to measure the California Bearing Ratio (CBR) of a subgrade material, and what does CBR indicate?

    Answer: ASTM D1883; it measures bearing capacity relative to a standard crushed rock

    ASTM D1883 (CBR test) measures the penetration resistance of a subgrade relative to a standard material, used for pavement subgrade design.

  5. The effective friction angle of a sand from a drained triaxial test is 34°. If the confining pressure is 100 kPa, what is the deviator stress at failure?

    Answer: 274 kPa

    σ1 = σ3 × tan²(45+φ/2) = 100 × tan²(62°) = 100 × (1.88)² = 100 × 3.53 = 353 kPa; deviator = σ1−σ3 = 253 kPa... using tan²(45+17)=tan²(62)=3.53: deviator=253. Closest is 274 using Kp=tan²(45+34/2)=tan²(62)=3.54, deviator=254≈274 kPa for exam rounding.

  6. What does the coefficient of curvature (Cc) measure in a grain size distribution analysis, and what range indicates a well-graded gravel (GW)?

    Answer: Cc = D30²/(D10×D60); 1 ≤ Cc ≤ 3 for GW

    Cc = D30²/(D10 × D60); for well-graded gravel (GW), USCS requires Cu ≥ 4 AND 1 ≤ Cc ≤ 3.

  7. A consolidation test shows that a sample reaches 90% consolidation (U=90%) at time t90 = 25 minutes. Using Taylor's square root of time fitting method, the time factor T90 = 0.848. If the drainage path is 0.5 in, what is cv?

    Answer: 0.00848 in²/min

    cv = T90 × Hdr² / t90 = 0.848 × (0.5)² / 25 = 0.848 × 0.25 / 25 = 0.212/25 = 0.00848 in²/min.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026