← All Civil Engineering PE Flashcard Decks

Reinforced Concrete Design Flashcards

7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Reinforced Concrete Design flashcards as text
  1. A rectangular beam has b = 14 in, d = 22 in, f'c = 4000 psi, fy = 60,000 psi, and As = 3.0 in². What is the approximate nominal moment capacity Mn?

    Answer: 248 ft-kips

    With a = Asfy/(0.85f'cb) = 3.0×60/(0.85×4×14) ≈ 3.78 in, Mn = Asfy(d - a/2) = 3.0×60×(22 - 1.89)/12 ≈ 248 ft-kips.

  2. According to ACI 318, the minimum clear cover for reinforcement in a concrete beam exposed to weather (deicing salts) is:

    Answer: 2.5 in

    ACI 318 Table 20.6.1.3 requires 2.5 in clear cover for #6 through #11 bars exposed to weather (deicing salts).

  3. For a doubly reinforced concrete beam, the compression steel stress f's is typically determined by:

    Answer: Using strain compatibility with εs' = (c - d')/c × 0.003

    Strain compatibility requires εs' = 0.003(c − d')/c, then f's = Es×εs' ≤ fy to verify whether compression steel yields.

  4. A T-beam floor system has a 5-in slab, beam web width bw = 12 in, center-to-center spacing of beams = 72 in, and span = 20 ft. The effective flange width per ACI 318 is:

    Answer: 60 in

    Effective flange width = min(span/4, bw + 8hf each side, center-to-center) = min(60 in, 12+80=92 in, 72 in) = 60 in.

  5. The ACI 318 minimum shear reinforcement for a beam is not required when:

    Answer: Vu ≤ φVc/2

    ACI 318 Section 9.6.3.1 allows omission of minimum shear reinforcement when Vu ≤ φVc/2 for most beams.

  6. The development length for a #8 top bar (f'c = 4000 psi, fy = 60,000 psi, normal weight concrete, cover = 1.5 in, no transverse reinforcement) is approximately:

    Answer: 60 in

    Using ld = (3fy/(40λ√f'c)) × (ψt ψe ψs / ((cb+Ktr)/db)) × db with ψt=1.3 (top bar), (cb+Ktr)/db limited to 2.5, gives approximately 60 in.

  7. Which failure mode must be prevented to ensure ductile behavior in a flexural member per ACI 318?

    Answer: Concrete crushing before tension steel yields

    ACI 318 limits reinforcement ratio to ensure the tension steel yields before concrete reaches εu = 0.003, guaranteeing ductile behavior.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026