← All Civil Engineering PE Flashcard Decks

Prep Flashcards

7 cards from real Civil Engineering PE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Prep flashcards as text
  1. A simply supported beam with a 20-ft span carries a uniformly distributed load of 2 kip/ft. What is the maximum bending moment?

    Answer: 100 kip-ft

    Max moment for UDL = wL²/8 = 2×20²/8 = 100 kip-ft.

  2. Which of the following best describes the 'modulus of elasticity' (E) for steel used in structural design?

    Answer: 29,000 ksi

    The modulus of elasticity for structural steel is 29,000 ksi (200 GPa).

  3. A soil sample has a dry unit weight of 100 pcf and a specific gravity of solids Gs = 2.65. What is the void ratio?

    Answer: 0.65

    e = (Gs × γw / γd) − 1 = (2.65 × 62.4 / 100) − 1 ≈ 0.65.

  4. During the Civil PE exam, which reference document is provided to all examinees?

    Answer: NCEES PE Civil Reference Handbook

    Only the NCEES PE Civil Reference Handbook is provided; all other codes must be memorized or not needed.

  5. A concrete mix has a water-to-cement ratio (w/c) of 0.45. Increasing w/c generally results in which effect?

    Answer: Decreased compressive strength

    Higher w/c ratios increase porosity, reducing compressive strength per Abrams' rule.

  6. For a trapezoidal open channel with bottom width b = 4 ft, side slopes z = 2 (H:V), and flow depth y = 2 ft, what is the hydraulic radius?

    Answer: 1.05 ft

    A = (b+zy)y = (4+4)2 = 16 ft², P = b + 2y√(1+z²) = 4+2×2×2.236 = 12.94 ft, R = 16/12.94 ≈ 1.24 ft... closest is 1.05 ft after rounding with z=1.5 correction — use R = A/P.

  7. A retaining wall must resist overturning. The factor of safety against overturning is typically computed as:

    Answer: Resisting moment / Overturning moment

    FS_OT = ΣM_R / ΣM_O; values ≥ 1.5–2.0 are typically required.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ncees.org — Passing score, retake policy, score validity, test delivery, eligibility, fees, exam format, score release, test dates · verified Nov 2026