CITB Specialists Fire Safety in Specialist Trades

Question 1

What is the most common cause of fire on UK construction sites?

Accepted Answer

Hot works (welding, cutting, grinding, and blowtorch use)

Answer

Hot works including welding, cutting, grinding, and use of blowtorches are the most common cause of construction site fires. Sparks and heat can ignite combustible materials, sometimes causing smouldering fires that are not discovered until hours later.

Question 2

What is a Hot Work Permit and who issues it?

Accepted Answer

A document authorising hot work at specific locations for a defined time, issued by the site manager or fire safety coordinator

Answer

A Hot Work Permit is a site safety document that authorises specific hot work operations at defined locations for a specific time period. It specifies fire precautions, fire watch requirements, and who is responsible for the work area.

Question 3

How long should a fire watch be maintained after hot work is completed?

Accepted Answer

At least 60 minutes after hot work ceases, with a further check after returning later in the day

Answer

A fire watch of at least 60 minutes must be maintained after hot work ends because smouldering fires in concealed areas (wall cavities, insulation) may take time to develop. A further check at the end of the shift or day is also required.

Question 4

What fire extinguisher is appropriate for an electrical fire?

Accepted Answer

CO2 (carbon dioxide) extinguisher

Answer

CO2 extinguishers are the correct choice for electrical fires as they do not conduct electricity and leave no residue. Water extinguishers must never be used on live electrical equipment due to electrocution risk.

Question 5

What is a Class F fire and which specialist trade must consider it?

Accepted Answer

A fire involving cooking oils and fats — relevant to catering equipment installers

Answer

Class F fires involve cooking oils and fats. Catering equipment installers and kitchen extraction duct cleaners must be aware of Class F fire risks and use only Class F wet chemical extinguishers — standard water, foam, or CO2 extinguishers are ineffective.

CITB HS&E Specialists Practice Test

CITB HS&E Specialists Practice Test

CITB Specialists Fire Safety in Specialist Trades