Refrigeration System Fundamentals Flashcards
6 cards from real CIRO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Refrigeration System Fundamentals flashcards as text
What are the four main components of a basic vapor compression refrigeration cycle?
Answer: Compressor, condenser, expansion device, and evaporator
The vapor compression cycle uses a compressor to pressurize refrigerant gas, a condenser to reject heat and condense it, an expansion device to reduce pressure, and an evaporator to absorb heat and boil the refrigerant.
What is superheat in refrigeration and why is it important?
Answer: The temperature of refrigerant vapor above its saturation (boiling) temperature, ensuring only vapor enters the compressor
Superheat ensures all liquid refrigerant has evaporated before entering the compressor. Liquid slugging (liquid entering the compressor) can cause severe mechanical damage. Typical superheat is 8-12°F.
What is subcooling in refrigeration?
Answer: The temperature of liquid refrigerant below its saturation (condensing) temperature, ensuring only liquid reaches the expansion device
Subcooling ensures fully liquid refrigerant reaches the expansion device, maximizing system efficiency. Typical subcooling is 10-15°F. Insufficient subcooling causes flash gas and reduced capacity.
What is the function of a compressor in an industrial refrigeration system?
Answer: To compress low-pressure refrigerant vapor into high-pressure, high-temperature vapor for heat rejection in the condenser
The compressor is the heart of the refrigeration system, doing mechanical work to raise refrigerant pressure and temperature so heat can be rejected to a warmer medium (air or water) in the condenser.
What refrigerant is most commonly used in industrial refrigeration systems?
Answer: Anhydrous ammonia (R-717)
Ammonia (R-717) is the dominant refrigerant in industrial applications due to its excellent thermodynamic properties, zero ODP, zero GWP, low cost, and distinctive odor that aids leak detection.
What is the coefficient of performance (COP) in refrigeration?
Answer: The ratio of cooling effect produced to the energy input required, measuring system efficiency
COP = Refrigerating effect / Work input. A COP of 4 means the system produces 4 units of cooling for every 1 unit of energy consumed. Higher COP indicates greater efficiency.