← All CIP Flashcard Decks

Safety & Environmental Considerations Flashcards

7 cards from real CIP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety & Environmental Considerations flashcards as text
  1. A worker is stuck by a hypodermic needle hidden in a residential bag. Which OSHA standard governs the employer's response?

    Answer: Bloodborne Pathogens Standard

    OSHA 29 CFR 1910.1030 requires exposure control, post-exposure evaluation, and follow-up for needlestick injuries.

  2. What is OSHA's 8-hour time-weighted average action level that triggers a hearing conservation program?

    Answer: 85 dBA

    At 85 dBA TWA, employers must implement a hearing conservation program including monitoring and audiometric testing.

  3. When climbing into or out of a collection truck cab, what technique best prevents slips and falls?

    Answer: Maintain three points of contact

    Keeping two hands and one foot or two feet and one hand in contact greatly reduces fall risk.

  4. Many states have 'Slow Down to Get Around' laws. What do they require?

    Answer: Motorists must slow down or move over when passing stopped sanitation vehicles

    These laws protect sanitation workers by requiring passing motorists to reduce speed or change lanes.

  5. A hydraulic hose bursts on a route, leaking fluid toward a storm drain. What should the driver do first?

    Answer: Stop the vehicle, contain the spill with the spill kit, and report it

    Prompt containment prevents fluid from entering storm drains, which could violate Clean Water Act stormwater rules.

  6. Which items are classified as 'universal waste' under federal EPA rules?

    Answer: Batteries, mercury-containing lamps, pesticides, and mercury devices

    Universal waste rules (40 CFR Part 273) streamline management of common hazardous items like batteries and fluorescent lamps.

  7. What is the required clearance from overhead power lines (up to 50 kV) when operating a roll-off hoist or front-loader arms?

    Answer: 10 feet

    OSHA requires at least 10 feet of clearance from energized lines rated 50 kV or less.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. acainternational.org — Test delivery, eligibility, fees, renewal, retake policy, score release, score validity · verified Nov 2026