CHSP Regulatory Compliance & Standards 3

Question 1

The Life Safety Code (NFPA 101) distinguishes between 'existing' and 'new' healthcare occupancies primarily to:

Accepted Answer

Apply different but appropriate requirements based on construction date

Answer

NFPA 101 recognizes that retrofitting older buildings to meet all new construction standards may be impractical, so it applies separate—but still protective—requirements to existing occupancies.

Question 2

Which standard establishes requirements for the safe handling of compressed medical gases in healthcare facilities?

Accepted Answer

NFPA 99

Answer

NFPA 99 Health Care Facilities Code Chapter 5 governs gas and vacuum systems, including storage, distribution, and use of medical gases.

Question 3

Under OSHA's Ionizing Radiation Standard (29 CFR 1910.1096), the permissible exposure limit (PEL) for whole-body occupational radiation exposure is:

Accepted Answer

1.25 rem per quarter (5 rem/year)

Answer

OSHA's ionizing radiation standard sets a PEL of 1.25 rem per calendar quarter, equating to 5 rem per year for whole-body exposure.

Question 4

A hospital is accredited by The Joint Commission. When a state health department surveyor arrives unannounced, the hospital should:

Accepted Answer

Cooperate fully, as state licensure surveys are independent of TJC accreditation

Answer

State licensure and TJC accreditation are independent processes; facilities must cooperate with state surveyors regardless of their TJC accreditation status.

Question 5

The FDA's Medical Device Reporting (MDR) regulation requires healthcare facilities to report device-related serious injuries to the manufacturer within:

Accepted Answer

10 working days

Answer

Under 21 CFR Part 803, user facilities must submit MDR reports for serious injuries to the device manufacturer within 10 working days of becoming aware of the event.

CHSP - Certified Healthcare Safety Professional Practice Test

CHSP - Certified Healthcare Safety Professional Practice Test

CHSP Regulatory Compliance & Standards 3