Safety Regulations & Compliance Flashcards
7 cards from real CFB practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 7 Safety Regulations & Compliance flashcards as text
Which document must a CFB maintain on-site to demonstrate that workers have been trained on hazardous substances they may encounter?
Answer: Safety Data Sheet (SDS) and training records
HazCom compliance requires both accessible SDSs and documented employee training records for each hazardous chemical on site.
Under the Americans with Disabilities Act (ADA) Accessibility Guidelines, what is the maximum running slope allowed for an accessible ramp?
Answer: 1:12 (8.33%)
ADA guidelines (and ICC A117.1) specify a maximum ramp slope of 1:12, meaning for every 12 inches of run there is no more than 1 inch of rise.
When is a confined space permit required on a construction site under OSHA 29 CFR 1926.1203?
Answer: When a permit-required confined space (PRCS) exists with recognized serious hazards
A permit is required when a space meets PRCS criteria, including atmospheric, engulfment, entrapment, or other recognized serious hazards.
What is the leading cause of fatalities in the construction industry, as identified by OSHA's 'Fatal Four'?
Answer: Falls
Falls consistently account for the largest share of construction fatalities and top OSHA's Fatal Four list.
A field builder notices a ground fault on a temporary power system. Which protective device is specifically required by OSHA for 120-volt, single-phase, 15- and 20-ampere receptacle outlets on construction sites?
Answer: Ground fault circuit interrupter (GFCI)
OSHA 1926.404(b)(1) mandates GFCI protection on all 120V, single-phase, 15/20A receptacles used in construction to prevent electrocution.
Which federal regulation requires construction employers to record and report work-related injuries and illnesses using OSHA 300, 300A, and 301 forms?
Answer: 29 CFR 1904
29 CFR Part 1904 establishes the OSHA Recordkeeping Rule, requiring employers to maintain injury and illness logs using the 300/300A/301 forms.
According to ANSI Z87.1, what does the 'Z87+' marking on safety eyewear indicate?
Answer: High-impact rated eyewear
The '+' suffix on the Z87 marking designates that the eyewear meets the high-impact protection standard under ANSI Z87.1.