CFA Operator Controls & Dashboard 2 — Questions and Answers
Question 1: What does a red battery warning light on a forklift dashboard indicate?
- Battery is fully charged
- Battery or charging system needs attention (Correct answer)
- Battery is disconnected from the forks
- Battery mode is activated for quiet operation
Correct answer: Battery or charging system needs attention
A red battery warning light signals that the battery charge is low or the charging system is malfunctioning and requires immediate attention.
Question 2: Which dashboard gauge monitors the engine coolant temperature on an internal combustion forklift?
- Oil pressure gauge
- Ammeter
- Temperature gauge (Correct answer)
- Fuel level gauge
Correct answer: Temperature gauge
The temperature gauge displays engine coolant temperature and alerts the operator if the engine is overheating.
Question 3: What is the purpose of the hour meter on a forklift?
- Tracks fuel consumption per hour
- Records total operating hours for maintenance scheduling (Correct answer)
- Displays current shift time
- Measures hydraulic pressure over time
Correct answer: Records total operating hours for maintenance scheduling
The hour meter records total engine or motor run time so maintenance intervals can be scheduled at the correct usage milestones.
Question 4: On an electric forklift, what does the state-of-charge (SOC) indicator tell the operator?
- Hydraulic fluid level
- Remaining battery energy available (Correct answer)
- Load weight on the forks
- Motor temperature
Correct answer: Remaining battery energy available
The SOC indicator shows how much battery capacity remains, helping operators plan when to return to the charging station.
Question 5: If the oil pressure warning light illuminates while operating a propane forklift, the operator should FIRST:
- Continue operating and report it at end of shift
- Increase engine speed to build pressure
- Stop the forklift immediately and shut off the engine (Correct answer)
- Switch to a lower gear
Correct answer: Stop the forklift immediately and shut off the engine
Low oil pressure can cause catastrophic engine damage, so the operator must stop and shut off the engine immediately.
Question 6: What control allows an operator to tilt the mast forward and backward?
- Lift lever
- Tilt lever (Correct answer)
- Side-shift lever
- Reach lever
Correct answer: Tilt lever
The tilt lever controls the forward and backward angle of the mast to stabilize loads during travel or positioning.
Question 7: On a sit-down counterbalance forklift, where is the directional control (forward/reverse) typically located?
- On the overhead guard
- On the steering column or dashboard panel (Correct answer)
- On the rear counterweight
- On the left footrest
Correct answer: On the steering column or dashboard panel
The directional control lever or switch is mounted on the steering column or dashboard within easy reach of the operator.
CFA Operator Controls & Dashboard 2
What does a red battery warning light on a forklift dashboard indicate?