Operator Controls & Dashboard Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Operator Controls & Dashboard flashcards as text
What does a red battery warning light on a forklift dashboard indicate?
Answer: Battery or charging system needs attention
A red battery warning light signals that the battery charge is low or the charging system is malfunctioning and requires immediate attention.
Which dashboard gauge monitors the engine coolant temperature on an internal combustion forklift?
Answer: Temperature gauge
The temperature gauge displays engine coolant temperature and alerts the operator if the engine is overheating.
What is the purpose of the hour meter on a forklift?
Answer: Records total operating hours for maintenance scheduling
The hour meter records total engine or motor run time so maintenance intervals can be scheduled at the correct usage milestones.
On an electric forklift, what does the state-of-charge (SOC) indicator tell the operator?
Answer: Remaining battery energy available
The SOC indicator shows how much battery capacity remains, helping operators plan when to return to the charging station.
If the oil pressure warning light illuminates while operating a propane forklift, the operator should FIRST:
Answer: Stop the forklift immediately and shut off the engine
Low oil pressure can cause catastrophic engine damage, so the operator must stop and shut off the engine immediately.
What control allows an operator to tilt the mast forward and backward?
Answer: Tilt lever
The tilt lever controls the forward and backward angle of the mast to stabilize loads during travel or positioning.
On a sit-down counterbalance forklift, where is the directional control (forward/reverse) typically located?
Answer: On the steering column or dashboard panel
The directional control lever or switch is mounted on the steering column or dashboard within easy reach of the operator.