Pre-Shift Inspection Checklist Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Pre-Shift Inspection Checklist flashcards as text
During a pre-shift inspection, you notice the forklift's overhead guard has a cracked weld. What is the correct action?
Answer: Tag the forklift out of service and report it to a supervisor
A cracked weld on the overhead guard compromises operator protection and requires the forklift to be taken out of service immediately.
When checking the hydraulic system during a pre-shift inspection, what should you look for on the mast and lift chains?
Answer: Leaks, stretch, and damage to hoses, cylinders, and chains
The hydraulic system inspection includes checking for fluid leaks, hose damage, cylinder condition, and chain stretch or wear.
A pre-shift inspection reveals one of the forklift's tires is missing a significant chunk of rubber. What should the operator do?
Answer: Remove the forklift from service until the tire is replaced
Damaged tires affect stability and traction, requiring the forklift to be taken out of service until the tire is replaced.
Which document should an operator complete after finishing a pre-shift inspection?
Answer: A daily inspection report or checklist form
OSHA requires operators to complete a daily inspection checklist to document the forklift's condition before each shift.
During the pre-shift inspection, you test the horn and it does not work. What is the appropriate response?
Answer: Tag the forklift out of service and notify maintenance
A non-functional horn is a safety defect that must be reported and the forklift must not be operated until repaired.
When inspecting the battery on an electric forklift before a shift, what is a key safety check?
Answer: Check electrolyte levels, cable connections, and for any corrosion or cracks
Battery inspection includes checking electrolyte levels, secure cable connections, and looking for corrosion, cracks, or leaks that could create hazards.
What is the purpose of checking the forklift's data plate during a pre-shift inspection?
Answer: To verify the truck's rated capacity and ensure it matches the loads to be handled
The data plate lists the forklift's rated capacity and other specifications that operators must verify match the intended work before operating.