Practice Test GeeksCFA Practice Test
← All CFA Flashcard Decks

Forklift Operation & Safety Procedures Flashcards

7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Forklift Operation & Safety Procedures flashcards as text

  1. What is the primary hazard of operating an internal combustion (IC) forklift indoors without proper ventilation?

    Answer: Carbon monoxide buildup, which can be lethal

    IC forklifts emit carbon monoxide, an odorless, colorless gas that can reach fatal concentrations in enclosed spaces with poor ventilation.

  2. OSHA requires forklift operators to be recertified when which of the following occurs?

    Answer: The operator is involved in an accident or near-miss, or is observed operating unsafely

    OSHA 1910.178(l)(4) mandates retraining after an accident, near-miss, or observation of unsafe operation.

  3. What is the correct mast tilt position when picking up a load from a shelf?

    Answer: Mast vertical or slightly forward tilted when inserting forks, then tilted back after engaging the load

    Leveling or slightly forward-tilting the mast during insertion allows clean fork entry; tilting back after load engagement secures it for travel.

  4. What minimum safe following distance should a forklift maintain from another forklift while traveling?

    Answer: Three truck lengths

    OSHA and industry standards recommend maintaining a following distance of at least three truck lengths to allow adequate stopping distance.

  5. Which action is strictly prohibited when working around battery-powered forklifts during charging?

    Answer: Smoking or creating sparks near charging batteries

    Charging batteries release hydrogen gas, which is highly explosive; any ignition source near a charging station can cause a violent explosion.

  6. A forklift operator notices the hydraulic fluid level is low during the pre-shift inspection. The correct action is to:

    Answer: Report it to the supervisor and do not operate the truck until it is serviced

    Low hydraulic fluid can cause brake or lift failure; the forklift must be removed from service and repaired before use.

  7. What is the purpose of forklift training refresher requirements under OSHA 29 CFR 1910.178(l)?

    Answer: To ensure operators maintain safe operating skills and address any deficiencies identified

    OSHA's refresher training requirements are designed to correct unsafe behaviors and keep operators current with best practices and equipment changes.