Silicone Materials & Color Matching Flashcards
7 cards from real CCA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Silicone Materials & Color Matching flashcards as text
During silicone color matching, the anaplastologist evaluates the patient's skin tone under a standardized D65 light source. What does D65 represent?
Answer: A 6500 Kelvin daylight-equivalent illuminant
D65 is an international standard illuminant representing average northern hemisphere daylight at approximately 6500 Kelvin color temperature.
Inhibition of platinum-catalyzed silicone cure most commonly results from contact with which substance?
Answer: Sulfur-containing compounds or tin catalysts
Sulfur compounds (from latex gloves, condensation-cure silicones) and tin catalysts inhibit platinum by poisoning the catalyst, preventing cure.
What is the Munsell color system component that describes the purity or saturation of a color?
Answer: Chroma
In the Munsell system, Chroma describes the saturation or colorfulness of a hue relative to a neutral gray of equal value.
An anaplastologist is matching a patient with vitiligo. Which technique best addresses the high-contrast hypopigmented patches?
Answer: Layering translucent tints over a base color with stippling for selective depigmentation effects
Selective translucent layering and stippling techniques allow the anaplastologist to replicate patchy depigmentation patterns characteristic of vitiligo.
Which silicone cross-linking mechanism produces ethanol as a byproduct during curing?
Answer: Condensation cure (alkoxy type)
Alkoxy-type condensation cure silicones release ethanol as a byproduct when alkoxy groups react with moisture during cross-linking.
Why is intrinsic coloration generally preferred over extrinsic coloration in silicone prostheses?
Answer: Intrinsic coloration is embedded throughout and does not fade or wear off with daily use
Intrinsic pigments are dispersed throughout the silicone matrix, ensuring color durability even as surface layers wear, unlike extrinsic surface paints.
The spectrophotometer reading of a patient's skin shows L* = 65, a* = 12, b* = 18. What do positive a* and b* values indicate?
Answer: Red and yellow components
In CIELAB, positive a* indicates a red shift and positive b* indicates a yellow shift, both common in Fitzpatrick Type III-IV skin tones.