CER Quality Assurance and Documentation 2

Question 1

Which document must be completed BEFORE an endoscope is returned to clinical use after reprocessing?

Accepted Answer

Reprocessing log confirming all steps were completed

Answer

Incident report

Answer

Manufacturer warranty card

Answer

Patient consent form

Question 2

What is the primary purpose of tracking lot numbers for disinfectants in endoscope reprocessing documentation?

Accepted Answer

To enable traceability during product recalls or quality failures

Answer

To calculate inventory costs

Answer

To satisfy manufacturer warranty requirements

Answer

To document employee training hours

Question 3

A reprocessing technician discovers an AER cycle was interrupted mid-cycle. What is the FIRST action?

Accepted Answer

Document the interruption and quarantine the scope

Answer

Restart the AER cycle immediately

Answer

Report to infection control only after completing the cycle

Answer

Return the scope to storage pending further review

Question 4

Which QA indicator directly measures the effectiveness of manual cleaning before high-level disinfection?

Accepted Answer

Residual protein test (e.g., ATP or protein assay)

Answer

AER cycle time log

Answer

MEC test strip result

Answer

Leak test pressure reading

Question 5

How long must endoscope reprocessing records typically be retained according to standard accreditation guidelines?

Accepted Answer

A minimum of 3 years, often longer per state law or facility policy

Answer

6 months

Answer

1 year

Answer

Until the endoscope is decommissioned

Question 6

What information is LEAST likely to be required on a standard endoscope reprocessing log?

Accepted Answer

Patient name or procedure room number

Answer

Technician ID or initials

Answer

Disinfectant lot number and expiration date

Answer

Scope serial number

Question 7

A quality audit reveals that MEC strips are being tested only at the start of each shift rather than before each use. This is MOST concerning because:

Accepted Answer

Disinfectant concentration can drop below effective levels between uses during a shift

Answer

It wastes test strips unnecessarily

Answer

Manufacturers require hourly testing

Answer

OSHA mandates per-use MEC testing