CDT Safety Regulations & OSHA Compliance 3

Question 1

Which ANSI standard governs safety requirements for drafting tables and adjustable workstations to prevent tipping hazards?

Accepted Answer

ANSI/BIFMA X5.5

Answer

ANSI/BIFMA X5.5 covers safety and durability standards for desk products, including drafting tables, to prevent tip-over and structural failures.

Question 2

Under OSHA's exit route requirements, what is the minimum ceiling height for an exit route in a workplace?

Accepted Answer

7 feet

Answer

29 CFR 1910.36 requires exit routes to have a ceiling height of at least 7 feet 6 inches, though many sources round to 7 feet for general passages.

Question 3

What is the primary purpose of OSHA's Lockout/Tagout (LOTO) standard when a drafter operates large-format cutting or binding equipment?

Accepted Answer

Control hazardous energy during servicing or maintenance

Answer

29 CFR 1910.147 requires LOTO procedures to de-energize equipment before maintenance to prevent unexpected startup and injury.

Question 4

A CDT working in a facility notices a fire extinguisher has not been inspected in over a year. Which OSHA standard addresses portable fire extinguisher maintenance?

Accepted Answer

29 CFR 1910.157

Answer

29 CFR 1910.157 requires portable fire extinguishers to be inspected monthly and maintained annually by a qualified person.

Question 5

What minimum illumination level does OSHA recommend for drafting tasks requiring fine detail work?

Accepted Answer

50 foot-candles

Answer

OSHA guidelines recommend at least 50 foot-candles for drafting and fine detail work to reduce eye strain and errors.

(CDT) Certified Drafting Technician Practice Test

(CDT) Certified Drafting Technician Practice Test

CDT Safety Regulations & OSHA Compliance 3