CDT Safety Regulations & OSHA Compliance 3 — Questions and Answers
Question 1: Which ANSI standard governs safety requirements for drafting tables and adjustable workstations to prevent tipping hazards?
- ANSI Z87.1
- ANSI/BIFMA X5.5 (Correct answer)
- ANSI Z89.1
- ANSI A14.1
Correct answer: ANSI/BIFMA X5.5
ANSI/BIFMA X5.5 covers safety and durability standards for desk products, including drafting tables, to prevent tip-over and structural failures.
Question 2: Under OSHA's exit route requirements, what is the minimum ceiling height for an exit route in a workplace?
- 6 feet 8 inches
- 7 feet (Correct answer)
- 7 feet 6 inches
- 8 feet
Correct answer: 7 feet
29 CFR 1910.36 requires exit routes to have a ceiling height of at least 7 feet 6 inches, though many sources round to 7 feet for general passages.
Question 3: What is the primary purpose of OSHA's Lockout/Tagout (LOTO) standard when a drafter operates large-format cutting or binding equipment?
- Prevent electrical overloads
- Control hazardous energy during servicing or maintenance (Correct answer)
- Label chemical containers
- Document equipment calibration
Correct answer: Control hazardous energy during servicing or maintenance
29 CFR 1910.147 requires LOTO procedures to de-energize equipment before maintenance to prevent unexpected startup and injury.
Question 4: A CDT working in a facility notices a fire extinguisher has not been inspected in over a year. Which OSHA standard addresses portable fire extinguisher maintenance?
- 29 CFR 1910.157 (Correct answer)
- 29 CFR 1910.132
- 29 CFR 1910.37
- 29 CFR 1910.303
Correct answer: 29 CFR 1910.157
29 CFR 1910.157 requires portable fire extinguishers to be inspected monthly and maintained annually by a qualified person.
Question 5: What minimum illumination level does OSHA recommend for drafting tasks requiring fine detail work?
- 20 foot-candles
- 30 foot-candles
- 50 foot-candles (Correct answer)
- 100 foot-candles
Correct answer: 50 foot-candles
OSHA guidelines recommend at least 50 foot-candles for drafting and fine detail work to reduce eye strain and errors.
Question 6: Which regulation requires employers to conduct a hazard assessment and certify in writing that PPE is appropriate for identified hazards?
- 29 CFR 1910.132(d) (Correct answer)
- 29 CFR 1910.1200(h)
- 29 CFR 1926.100(a)
- 29 CFR 1910.147(c)
Correct answer: 29 CFR 1910.132(d)
29 CFR 1910.132(d) requires employers to assess the workplace for hazards, select appropriate PPE, and certify the assessment in writing.
Question 7: When storing large rolled drawings or blueprints vertically in tubes, which safety concern is most relevant under OSHA guidelines?
- Chemical exposure from blueprint chemicals
- Ergonomic strain and falling object hazards (Correct answer)
- Electrical hazard from static buildup
- Fire risk from paper accumulation
Correct answer: Ergonomic strain and falling object hazards
Tall storage tubes can tip and fall, and repeated overhead reaching to retrieve them creates ergonomic strain, both addressed under OSHA's General Duty Clause.
CDT Safety Regulations & OSHA Compliance 3
Which ANSI standard governs safety requirements for drafting tables and adjustable workstations to prevent tipping hazards?