Practice Test Geeks(CDT) Certified Drafting Technician Practice Test
← All CDT Flashcard Decks

Building Codes & Standards Flashcards

6 cards from real CDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Building Codes & Standards flashcards as text

  1. Which model building code is most widely adopted by U.S. states for commercial construction?

    Answer: International Building Code (IBC)

    The International Building Code (IBC), published by the International Code Council (ICC), is the most widely adopted model code for commercial construction across U.S. jurisdictions.

  2. What does the IBC Occupancy Classification system determine for a building?

    Answer: The fire protection, egress, and construction type requirements based on the building's intended use

    The IBC Occupancy Classification defines the building's use group, which drives fire protection, occupant load, egress, and allowable construction type requirements.

  3. Under the IBC, which construction type has the highest fire resistance requirements?

    Answer: Type I-A

    IBC Type I-A construction requires the highest fire-resistance ratings for structural elements, typically used for high-rise buildings.

  4. What is the primary purpose of the Americans with Disabilities Act (ADA) in relation to construction documents?

    Answer: To establish minimum accessibility requirements for facilities serving the public

    The ADA establishes minimum accessibility requirements ensuring that buildings open to the public are accessible to people with disabilities.

  5. What is the maximum allowable slope for an ADA-compliant accessible ramp under ADAAG?

    Answer: 1:12 (8.33%)

    ADAAG specifies a maximum ramp slope of 1:12 (one inch of rise per twelve inches of horizontal run, or approximately 8.33%) for accessible ramps.

  6. What building code document governs the installation of mechanical systems in U.S. construction?

    Answer: International Mechanical Code (IMC)

    The International Mechanical Code (IMC) governs the design, installation, and inspection of mechanical systems including HVAC equipment in buildings.