Doubles and Triples Flashcards
7 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Doubles and Triples flashcards as text
Before driving a double, you must make sure the air line shut-off valves at the rear of the last trailer are:
Answer: Closed
Closing the rear valves keeps air from escaping from the last trailer's service and emergency lines.
The shut-off valves at the rear of the front trailer must be which position when it is pulling a second trailer?
Answer: Open
Air must pass through to supply and control the rear trailer's brakes.
Which statement about backing doubles or triples is correct?
Answer: It is very difficult and should be avoided when possible
Multiple pivot points make backing hard, so avoid it or get out and look first.
On a converter dolly, you should check that the fifth wheel locking jaws are:
Answer: Securely locked around the kingpin
Locking jaws must hold the rear trailer's kingpin firmly.
What should you check when inspecting the coupling between two trailers?
Answer: Pintle hook locked, safety chains attached, air and electrical lines connected
A proper inspection covers the hook, chains, brake lines, and lights.
Before uncoupling a rear trailer from a converter dolly, you should first:
Answer: Chock the wheels or apply the rear trailer's parking brakes
Securing the rear trailer keeps it from rolling when uncoupled.
A trailer air supply control valve (yellow knob) is pushed in. What does this do?
Answer: Supplies air to the trailer brake system and releases spring brakes
Pushing it in supplies air to the trailer, releasing its spring brakes.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy