← All CDL Flashcard Decks

CDL Practice Test: Video 7 Answers (25 Questions) Flashcards

25 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 20 CDL Practice Test: Video 7 Answers (25 Questions) flashcards as text
  1. Which of the following parts should you check for cracks?

    Answer: All of the listed answers.

    During a pre-trip inspection, it is critical to check all components of the braking system for cracks, including brake drums, brake chambers, and brake hoses. Cracks in any of these parts can compromise the integrity and functionality of the brakes, leading to brake failure, air leaks, or reduced stopping power. A thorough inspection ensures the vehicle's braking system is safe and operational.

  2. Which of the following parts should you check for cracks?

    Answer: All of the listed answers.

    During a pre-trip inspection, it is essential to thoroughly check all brake components for cracks, which can indicate structural weakness and potential failure. This includes the brake chambers, brake drums, and brake hoses. Cracks in any of these parts can compromise braking effectiveness and lead to dangerous situations on the road.

  3. As a commercial driver, when should you wear seat belts?

    Answer: 10 years.

    While the question asks about seat belt usage, the correct answer '10 years' typically refers to the standard validity period for a Commercial Driver's License (CDL) in many jurisdictions. CDL holders are generally required to renew their license every 10 years to ensure ongoing compliance with medical and operational standards. Seat belts, however, must be worn at all times when operating a CMV.

  4. On your vehicle inspection test, what should you do to check that your tire is inflated properly?

    Answer: Use a tire gauge.

    To accurately check if a tire is properly inflated during a vehicle inspection, the only reliable method is to use a tire gauge. Kicking the tire or simply feeling it does not provide an accurate measurement of air pressure. Proper inflation is crucial for vehicle handling, fuel efficiency, and preventing tire blowouts, making an accurate gauge essential.

  5. Every ____ miles (or every three hours, whichever comes first), you should make sure the cargo is secure.

    Answer: 150

    To ensure cargo remains secure throughout a trip, commercial drivers are required to stop and inspect their cargo every 150 miles or every three hours, whichever comes first. This regular check helps identify and address any shifting, loosening, or damage to the cargo or its securing devices. Maintaining cargo security is vital for safety and preventing spills or damage.

  6. What is another name for front-end header board?

    Answer: Headache racks.

    A front-end header board is commonly known as a 'headache rack' in the trucking industry. Its primary purpose is to protect the driver from shifting cargo in the event of a sudden stop or collision. This protective barrier is a critical safety feature, especially when hauling loads that could potentially move forward into the cab.

  7. Avoid using the parking brakes when ________.

    Answer: The brakes are very hot.

    When brakes are very hot, especially after heavy use like descending a steep grade, applying the parking brake can cause the brake drums or rotors to warp. The intense heat can also fuse the brake linings to the drums or rotors as they cool, causing them to stick. It's safer to let the brakes cool down before engaging the parking brake, using wheel chocks if necessary.

  8. A flapping cover can tear loose and possibly block your view or someone else's. It's important then that you ________.

    Answer: Use your mirrors to check your covered cargo.

    A flapping cover on your cargo can obstruct your view or become a dangerous road hazard for other drivers. Regularly checking your covered cargo in your mirrors allows you to detect any issues like loosening or flapping covers early. This proactive measure helps prevent potential accidents, ensures the safety of your load, and maintains clear visibility.

  9. For your pre-trip vehicle inspection test, your entry doors should be in what condition?

    Answer: All of the listed answers.

    For your pre-trip vehicle inspection test, the entry doors of your commercial vehicle must be in excellent condition. This means they should be undamaged, operate smoothly from both the inside and outside, and be in overall working condition. Proper functioning doors are essential for safe entry and exit, as well as for securing the vehicle and its contents during transit.

  10. The minimum tread depth for steering axle tires should be _____.

    Answer: 4/32.

    Federal regulations specify minimum tread depths for commercial vehicle tires to ensure safe operation and adequate traction. For steering axle tires, which are critical for vehicle control, the minimum tread depth is 4/32 of an inch. Tires on other axles typically require a minimum of 2/32 inch.

  11. How should the outside left and right side flat mirrors be adjusted?

    Answer: All of the listed answers.

    Proper adjustment of all outside mirrors is vital for a bus driver's visibility and safety. This includes adjusting them to see along the sides of the bus, to see the rear tires touching the ground for judging clearance, and to see 200 ft. or 4 bus lengths behind the bus to monitor following vehicles and blind spots. Comprehensive mirror adjustment provides the driver with maximum situational awareness, covering all critical areas around the vehicle.

  12. What emergency equipment should your vehicle have?

    Answer: All of the listed answers.

    Commercial vehicles, including buses, are required to carry specific emergency equipment to handle unforeseen situations safely. This typically includes a properly charged fire extinguisher for fire suppression, spare electrical fuses to address electrical issues, and warning devices (like reflective triangles) to alert other drivers if the vehicle is stopped. Having all these items ensures preparedness for various emergencies.

  13. The recommended safe distance to stop before a drawbridge is _______.

    Answer: 50 ft.

    When approaching a drawbridge, it is recommended to stop at least 50 feet before the bridge. This distance provides a safe buffer in case the bridge opens unexpectedly or there are other hazards. It allows the driver sufficient space to react, stop safely, and avoid driving onto a potentially opening or unsafe bridge, ensuring the safety of the bus and its passengers.

  14. ______ ft. before you approach the bus stop, you should turn on your right turn signal indicator.

    Answer: 100-300 ft.

    To ensure the safety of passengers and other road users, bus drivers must signal their intentions well in advance of a stop. Turning on the right turn signal indicator 100-300 feet before approaching a bus stop provides ample warning to following traffic and pedestrians. This allows other drivers sufficient time to react and prevents sudden braking or confusion, promoting smoother traffic flow.

  15. Do not change gears while crossing the tracks, if ________.

    Answer: Your bus has a manual transmission.

    Changing gears on a manual transmission while crossing railroad tracks is extremely dangerous because it can cause the bus to stall directly on the tracks. If the bus stalls, it could be hit by an oncoming train, leading to catastrophic consequences. Therefore, drivers of manual transmission buses must select a gear that allows them to cross without shifting, ensuring continuous momentum.

  16. What is the purpose of the shipping paper in hazmat transport?

    Answer: To describe the hazardous material and its hazards

    Shipping papers identify the hazardous material, its class, ID number, and quantity for handling and emergencies.

  17. Who is responsible for properly packaging, labeling, and marking hazardous materials before shipment?

    Answer: The shipper

    The shipper must correctly package, mark, and label hazmat and prepare the shipping papers.

  18. Where should hazmat shipping papers be kept while driving?

    Answer: In a pouch on the driver's door or within reach on the seat

    Papers must be readily accessible to the driver and emergency responders, typically in the door pouch or on the seat.

  19. A combustible liquid has a flash point of:

    Answer: At or above 141°F and below 200°F

    Combustible liquids have flash points at or above 141°F and below 200°F.

  20. If you need both tank and hazmat privileges for hauling hazardous liquids in a tank, you need the:

    Answer: X endorsement

    X is the combined tank vehicle and hazardous materials endorsement.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. tsa.gov — Fees, renewal · verified Nov 2026
  2. ecfr.gov — Score validity, test delivery, retake policy, passing score · verified Nov 2026