CDL Practice Test: Video 2 Answers (25 Questions) Flashcards
25 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 CDL Practice Test: Video 2 Answers (25 Questions) flashcards as text
Which device allows you to remove oil and water from the air brake systems?
Answer: Air tank drain
Compressed air naturally contains moisture, and over time, oil from the compressor can also enter the system. These contaminants collect in the bottom of the air tanks. Air tank drains, located at the bottom of each tank, allow drivers to manually or automatically remove this accumulated water and oil, preventing corrosion, freezing, and damage to other air brake components.
What is another term for a brake pedal?
Answer: Treadle valve
Treadle valve. A brake pedal can also be known as a treadle valve or a foot valve.
Which of the following devices indicates how much air pressure you are applying to your brakes?
Answer: Application pressure gauge
The application pressure gauge indicates how much air pressure is being sent to the brake chambers when the driver presses the brake pedal. This gauge helps the driver monitor their braking effort and ensures that the brakes are receiving adequate pressure for effective stopping. It is distinct from the supply pressure gauge, which shows the total air pressure available in the tanks.
If your vehicle does not have automatic air tank drains, how often should you drain the tanks?
Answer: At the end of each working day
At the end of each working day. Draining the air tanks removes oil and moisture. If you do not drain each working day, you risk brake failure.
Which of the following devices indicates how much pressure you have in your air tanks?
Answer: Supply pressure gauge
The supply pressure gauge displays the amount of air pressure stored in the primary and secondary air tanks. This gauge is crucial for the driver to monitor the system's air supply, ensuring there is sufficient pressure for safe braking and operation of other air-powered accessories.
What does rust around on the wheel nuts may indicate?
Answer: All of the listed answers.
When stopping on a one-way or divided highway, you must place warning devices at specific intervals to alert approaching traffic. These distances are typically 10 feet, 100 feet, and 200 feet from the rear of your vehicle, placed in the direction of approaching traffic. Therefore, 'All of the listed answers' is correct because you need to place devices at each of these specified distances to provide adequate warning.
Which of the following parts should you check for cracks?
Answer: All of the listed answers.
During a vehicle inspection, it is crucial to check all critical components for cracks, as these can indicate structural weakness and potential failure. This includes brake drums, which can crack from excessive heat, brake chambers, and brake hoses, which can develop cracks from age or wear. Identifying and addressing cracks in any of these parts is essential for vehicle safety and preventing catastrophic failures.
Blocking is used in the __________ of a piece of cargo to keep it from sliding.
Answer: All of the listed answers.
Blocking is a fundamental cargo securement technique used to prevent cargo from shifting during transport. It involves placing sturdy materials (like wood blocks) against the front, back, and sides of the cargo to fill any empty spaces and brace it firmly against the vehicle's structure. This prevents movement in any direction, ensuring safety and preventing damage.
A red triangle with an orange center is a symbol for ________.
Answer: A slow moving vehicle.
A red triangle with an orange center is a universally recognized symbol for a slow-moving vehicle (SMV). This emblem is displayed on vehicles that typically travel at speeds of 25 mph or less, such as farm equipment or construction vehicles. Its purpose is to warn other drivers of the vehicle's slow speed, allowing them to adjust their driving and prevent rear-end collisions.
Typically, containerized loads are used _______.
Answer: When the freight is carried part way by rail or ship.
Containerized loads are primarily used in intermodal transportation, where freight is moved using multiple modes of transport, such as rail, ship, and truck, without being reloaded. The standardized containers allow for efficient transfer between different carriers, streamlining the logistics process and reducing handling costs and potential damage. This method is ideal when the freight is carried part way by rail or ship.
Wedge brakes and disc brakes are ______ than s-cam brakes.
Answer: Less common.
In commercial vehicles, s-cam brakes are the most prevalent type of air brake system due to their reliability and widespread use. While wedge brakes and disc brakes exist and offer certain advantages, they are significantly less common in the heavy commercial vehicle industry compared to s-cam brakes.
Even if you use false bulkheads to keep your livestock cargo bunched together, special care is still necessary especially when you ________.
Answer: Make a turn and enter a curve.
Even with false bulkheads, livestock cargo remains a dynamic load. The animals' movements can still cause significant weight shifts, especially when the vehicle is subjected to lateral forces. Therefore, extra caution is necessary when making turns and entering curves, as these maneuvers can amplify the effects of shifting weight and impact vehicle stability.
A flapping cover can tear loose and possibly block your view or someone else's. It's important then that you ________.
Answer: Use your mirrors to check your covered cargo.
Since a flapping cargo cover poses a significant safety risk by potentially blocking vision or detaching, it is crucial for drivers to constantly monitor its condition. Regularly using your mirrors to check your covered cargo allows you to identify and address any issues with the cover before it becomes a hazard.
For your pre-trip vehicle inspection test, your entry doors should be in what condition?
Answer: All of the listed answers.
For your pre-trip vehicle inspection test, the entry doors must be thoroughly checked to ensure they are safe and functional. This means they should be undamaged, operate smoothly from both the inside and outside, and be in overall working condition. Proper door function is essential for driver and passenger safety, as well as for securing cargo.
Vehicles should be equipped with emergency equipment. This equipment should be ______.
Answer: All of the listed answers.
Commercial motor vehicles are legally mandated to carry specific emergency equipment for safety and compliance. This essential equipment includes a fire extinguisher to address potential fires, spare electrical fuses to replace blown fuses in critical systems, and warning devices like reflective triangles to alert other drivers if the vehicle is stopped or disabled. Having all these items ensures preparedness for various roadside emergencies.
In icy or wet conditions, how should a school bus driver adjust driving behavior?
Answer: Reduce speed and increase following distance significantly
Slippery roads require lower speeds and greater following distance to stop safely.
While driving a bus, how many feet before a railroad crossing should you stop?
Answer: 15 to 50 ft.
Federal regulations and CDL guidelines mandate that commercial vehicles, including buses, stop at railroad crossings. The required stopping distance is between 15 and 50 feet from the nearest rail. This range provides sufficient space to clear the tracks if another vehicle stops behind, while also allowing the driver a clear view of the tracks in both directions for safety.
What is the most dangerous area around a school bus where students are at greatest risk?
Answer: The danger zone within 10 feet around the bus
The danger zone extends about 10 feet around the bus where the driver may not be able to see students.
While driving your bus, you should avoid _______.
Answer: Chatting with passengers.
The primary responsibility of a bus driver is the safe operation of the vehicle and the well-being of its passengers. Engaging in conversations or 'chatting' with passengers can be a significant distraction, diverting the driver's attention from the road, traffic conditions, and potential hazards. Maintaining focus on driving is paramount to prevent accidents and ensure everyone's safety.
When you back up your vehicle, you should assign someone as a lookout, who could warn you of ________.
Answer: All of the listed answers.
When backing a large vehicle like a bus, a lookout is invaluable for safety. A properly positioned lookout can provide crucial warnings about obstacles, approaching persons, and other vehicles that may be in the driver's blind spots. Their assistance significantly reduces the risk of collisions and ensures a safer backing maneuver, especially in crowded or complex environments.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy