CDL Practice Test: Video 10 Answers (25 Questions) Flashcards
25 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 CDL Practice Test: Video 10 Answers (25 Questions) flashcards as text
What is the Gross Vehicle Weight?
Answer: 150
Gross Vehicle Weight (GVW) refers to the total weight of a single vehicle, including its chassis, engine, body, accessories, fuel, driver, passengers, and all cargo. It's a critical measurement for ensuring the vehicle does not exceed its design limits or legal weight restrictions. Exceeding the GVW can compromise braking, handling, and structural integrity, leading to unsafe operation.
Every ____ miles (or every three hours, whichever comes first), you should make sure the cargo is secure.
Answer: To re-check the tightness of its nuts.
Federal regulations for commercial drivers require cargo to be inspected within the first 50 miles of a trip, and then every 150 miles or every three hours (whichever comes first). This regular inspection ensures that the cargo remains secure, preventing shifts that could affect vehicle stability, cause damage, or create hazards on the road.
Vehicles should be equipped with emergency equipment. This equipment should be ______.
Answer: All of the listed answers.
Commercial motor vehicles are legally required to carry specific emergency equipment to ensure safety in case of a breakdown or accident. This includes a properly charged fire extinguisher, spare electrical fuses (if the vehicle uses them), and warning devices like reflective triangles or flares for parked vehicles. Having all these items readily available is crucial for driver and public safety.
Your mirrors and windshields should be devoid of _____.
Answer: All of the listed answers.
For safe operation, mirrors and windshields must be clear of dirt, cracks, and illegal stickers. Dirt and cracks obstruct the driver's view, reducing visibility and increasing the risk of accidents. Illegal stickers can also impede vision or distract the driver, making it essential to maintain a clear and unobstructed field of vision through all glass surfaces.
The minimum tread depth for steering axle tires should be _____.
Answer: 4/32.
For safety and legal compliance, steering axle tires on commercial vehicles must have a minimum tread depth of 4/32 of an inch. This requirement ensures sufficient grip and water displacement, which are vital for maintaining steering control and preventing accidents. Regularly inspecting tire tread depth is a fundamental part of pre-trip and post-trip inspections.
What kind of situations may require you to more frequently check your mirrors?
Answer: All of the listed answers.
Situations such as merges, turns, and tight maneuvers require commercial drivers to check their mirrors more frequently. These actions involve significant changes in the vehicle's position relative to other traffic or obstacles. Constant mirror checks help drivers stay aware of their surroundings, monitor blind spots, and track the position of their trailer, which is crucial for preventing collisions.
Generally, how many tiedowns should you aim to have for each 10 ft. of cargo?
Answer: 1
Federal regulations for cargo securement specify minimum requirements for tiedowns to prevent cargo from shifting. Generally, you should aim to have at least one tiedown for every 10 feet of cargo length. This ensures adequate restraint, though additional tiedowns may be necessary depending on the cargo's weight, shape, and type to prevent movement in all directions.
On dry pavement at 55 mph what is the braking distance approximately of a heavy vehicle?
Answer: 216 ft.
Heavy vehicles require significantly longer braking distances than passenger cars due to their immense weight and momentum. On dry pavement, a heavy vehicle traveling at 55 mph requires approximately 216 feet to come to a complete stop. This figure highlights the critical importance of maintaining greater following distances and anticipating stops well in advance when operating a Commercial Motor Vehicle (CMV).
Placards must be _______.
Answer: Readable from all sides.
When transporting hazardous materials, placards are essential for identifying the type of hazard to emergency responders and other drivers. Regulations require these placards to be clearly visible and readable from all four sides of the vehicle. This ensures that the hazard information is accessible regardless of the vehicle's orientation, enhancing safety for everyone on the road.
Skids caused by acceleration usually occur on what type of surface?
Answer: Icy or snowy surface.
Skids caused by acceleration typically occur when too much power is applied to the drive wheels for the available traction. This loss of traction is most common on slippery surfaces, such as icy or snowy roads, where the tires cannot grip the surface effectively and begin to spin, causing the vehicle to skid.
The interlock applies the brakes and holds the throttle in idle position. The interlock releases the brakes when ______.
Answer: When you close the rear door.
The interlock system on a bus is a crucial safety feature designed to prevent the bus from moving while the rear door is open. It applies the brakes and holds the throttle at an idle position. The system will only release the brakes and allow the bus to be driven once the rear door is fully closed, ensuring passenger safety during loading and unloading.
Which of the following parts of your bus needs to be in safe working condition before driving?
Answer: All of the listed answers.
For the safety of passengers, especially in a bus, all components related to emergency egress, passenger movement, and communication must be in safe working condition. This includes functional emergency exit handles, secure handholds and railings for stability, and operational signaling devices to communicate with other road users and students. Therefore, all listed items are crucial for safe operation.
Who requires that buses built after 2000 are equipped with ABS?
Answer: The Department of Transportation.
The Department of Transportation (DOT), through its regulatory arm, the National Highway Traffic Safety Administration (NHTSA), mandates safety features for commercial vehicles. To enhance safety and prevent accidents, the DOT requires all new buses manufactured after March 1, 2000, to be equipped with Antilock Braking Systems (ABS).
School buses can have a tail swing up to how many feet?
Answer: 3
The tail swing of a school bus refers to the distance the rear of the bus moves sideways in the opposite direction of a turn. This movement can extend up to 3 feet, creating a potential hazard for anything in its path. Bus drivers must always account for this tail swing to prevent striking objects or pedestrians during turns and ensure safe maneuvering.
What is the maximum length of a bus' tail swing?
Answer: 3 ft.
When a bus turns, the rear portion of the vehicle swings out in the opposite direction of the turn, a phenomenon known as 'tail swing.' This tail swing can be up to 3 feet long, posing a significant hazard to pedestrians, parked cars, or objects near the bus's rear. Drivers must be aware of this dimension to avoid collisions when maneuvering in tight spaces and ensure safety.
When does the ABS activate?
Answer: When the wheels are about to lock up.
The Anti-lock Braking System (ABS) activates specifically when the wheels are about to lock up during braking. ABS sensors monitor wheel speed and, upon detecting an impending lock-up, rapidly modulate brake pressure to that wheel. This action prevents the wheels from skidding, allowing the driver to maintain steering control and often reducing stopping distances.
Commercial drivers need to be familiar with a number of abbreviations. GCW is one of them and it stands for ________.
Answer: Gross Combination Weight.
GCW is a standard abbreviation used in the commercial driving industry. It stands for Gross Combination Weight, which represents the total weight of a combination vehicle, including the power unit, trailers, and all cargo. Familiarity with such abbreviations is essential for CDL holders to understand vehicle specifications, regulatory limits, and operational requirements for safe and legal transportation.
When you are backing up a truck with a trailer, you turn the steering wheel _______.
Answer: In the opposite direction of where you want to go.
Backing a truck with a trailer requires counter-intuitive steering. To make the trailer go left, you turn the steering wheel to the right, and to make it go right, you turn the steering wheel to the left. This is because the pivot point is at the fifth wheel, and turning the tractor in one direction pushes the trailer in the opposite direction.
Your mirrors and windshields should be devoid of _____.
Answer: All of the listed answers.
For safe commercial vehicle operation, mirrors and windshields must provide a clear and unobstructed view. Cracks can impair visibility and compromise structural integrity, dirt obscures the view, and illegal stickers can block critical sightlines. Keeping these areas free from any obstructions is essential for maintaining situational awareness and preventing accidents.
What emergency equipment should your vehicle have?
Answer: All of the listed answers.
CDL regulations mandate that commercial vehicles carry specific emergency equipment for safety. This includes spare electrical fuses for quick repairs, a fire extinguisher for potential fires, and warning devices (like reflective triangles) to alert others if the vehicle is stopped. All these items are crucial for ensuring driver and public safety on the road.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy