CDL Practice Test: Video 1 Answers (24 Questions) Flashcards
24 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 CDL Practice Test: Video 1 Answers (24 Questions) flashcards as text
When is a CDL driver required to perform a pre-trip inspection?
Answer: Before each trip
Federal regulations require CDL drivers to inspect their vehicle before each trip to ensure it is safe to operate.
What must a CDL driver do if safety-affecting defects are found during a pre-trip inspection?
Answer: Have defects repaired before operating the vehicle
Safety-affecting defects must be repaired before operating the vehicle; drivers are legally responsible for ensuring the vehicle is in safe operating condition.
What is the acceptable oil level when checking a commercial vehicle's dipstick during a pre-trip inspection?
Answer: Within the normal operating range marked on the dipstick
The oil level must be within the normal operating range as indicated on the dipstick to ensure proper engine lubrication and prevent engine damage.
During a pre-trip inspection of the engine compartment, which items must be checked?
Answer: Oil level, coolant level, and condition of belts and hoses
The engine compartment check must include oil level, coolant level, power steering fluid, and the condition of belts and hoses.
How fast should the air pressure build in a dual air system?
Answer: From 85 to 100 psi in 45 seconds
From 85 to 100 psi in 45 seconds. In a single air system, the pressure should build from 50 to 90 psi in 3 minutes.
What is the name of the device that pumps air into the air storage tanks?
Answer: Air compressor
The air compressor is a vital component of an air brake system, responsible for drawing in air from the atmosphere and compressing it. This compressed air is then stored in the air tanks, providing the necessary pressure to operate the vehicle's brakes and other air-powered accessories.
What are the typical air compressor governor cut-in and cut-out pressures?
Answer: Cut-in: 100 psi; Cut-out: 125 psi
The air compressor governor controls when the compressor starts and stops pumping air into the tanks. In most air brake systems, the governor is set to cut-in around 100 psi, meaning the compressor begins to pump air. It then cuts-out around 125 psi, stopping the compressor once the system reaches full pressure to prevent over-pressurization and maintain optimal operating pressure.
What should the air pressure loss be in a single vehicle with a fully charged air system?
Answer: Less than 2 psi per minute
During a static air brake test, a single vehicle with a fully charged air system should not lose more than 2 psi in one minute after the initial pressure drop from applying the brakes. This low rate of pressure loss indicates that the air brake system is relatively free of leaks. Exceeding this limit suggests a problem that needs to be addressed for safe vehicle operation.
Which device helps reduce the risk of ice in the air brake systems during cold weather?
Answer: Alcohol evaporator
Alcohol evaporator. An alcohol evaporator puts alcohol into the air system to help reduce the risk of ice in cold weather. The governor controls when the air compressor will pump air into the air storage tanks. A safety valve protects the tank and system from too much pressure. The air tank drains allow you to drain oil and moisture from the air tanks.
Bulk packaging is ________.
Answer: When the freight is carried part way by rail or ship.
Bulk packaging refers to large containers used to transport goods, often designed for intermodal transport. This means the freight can be easily transferred between different modes of transportation, such as from a truck to a railcar or ship, without repacking. This efficiency is key when a shipment involves multiple legs by different carriers.
All versions of the Class B Pre-trip inspection tests will include ________.
Answer: An engine start and in-cab inspection.
The Class B CDL pre-trip inspection test always includes an engine start and a comprehensive in-cab inspection. This section assesses the driver's ability to check critical interior components like gauges, lights, horn, wipers, and mirrors, as well as starting the engine to check air pressure build-up and other engine-related functions. These steps are essential to ensure the vehicle is safe and operational before driving.
For commercial drivers, what does GCW stand for?
Answer: Gross Combination Weight.
For commercial drivers, GCW is an acronym that stands for Gross Combination Weight. This term refers to the total weight of a powered unit (truck), its attached trailer(s), and all the cargo they are carrying. Understanding and adhering to GCW limits is essential for legal compliance and safe operation of commercial vehicles.
Hanging meat in a refrigerated truck can be a __________.
Answer: The total weight of a single vehicle plus its load.
Hanging meat in a refrigerated truck creates a very unstable load with a high center of gravity. As the truck moves, the hanging carcasses can swing, causing significant weight shifts that severely impact the vehicle's stability and handling. This dynamic movement makes the truck prone to rollovers, especially during turns or sudden maneuvers, requiring extreme caution from the driver.
What is the minimum tread depth of steering axle tires?
Answer: 4/32.
Federal regulations require steering axle tires on commercial vehicles to have a minimum tread depth of 4/32 of an inch. This deeper tread ensures adequate traction and control, especially in wet conditions, which is crucial for steering and maintaining vehicle stability. Other tires on the vehicle typically require a minimum of 2/32 inch.
Which of the following is NOT a required emergency equipment must you have?
Answer: Glass breaking device
While a fire extinguisher, warning devices (like reflective triangles), and spare electrical fuses are mandatory emergency equipment for commercial vehicles, a glass breaking device is not a federally required item. Although it might be useful, it's not part of the standard regulatory requirements.
Which of the following is a condition in which you should downshift?
Answer: Before starting down a hill
Downshifting before starting down a hill is crucial for controlling vehicle speed and preventing brake fade. By engaging a lower gear, the engine provides significant braking power (engine braking), reducing the need for constant use of the service brakes and helping to maintain a safe speed on descents.
You are driving a 60 foot truck at 55 MPH, how much space (in seconds) should you keep in front of you?
Answer: 7 seconds
The recommended safe following distance for commercial vehicles is calculated by allowing one second for every 10 feet of vehicle length, plus an additional second if traveling over 40 MPH. For a 60-foot truck, this means 6 seconds (60 feet / 10 feet per second). Since the truck is traveling at 55 MPH, which is above 40 MPH, an extra second is added, resulting in a total safe following distance of 7 seconds.
Shifting into a lower gear and removing your foot off of the accelerator to slow your vehicle is known as?
Answer: Engine braking
The act of shifting into a lower gear and taking your foot off the accelerator to use the engine's resistance to slow the vehicle is known as engine braking. This technique is particularly important for commercial drivers, especially on downgrades, as it helps control speed and reduces wear on the service brakes. It allows the vehicle to slow down without relying solely on the friction brakes, preventing them from overheating and fading.
The average person requires how many hours of sleep per 24 hour period?
Answer: 7 or 8
For optimal health, alertness, and cognitive function, the average adult requires approximately 7 to 8 hours of sleep within a 24-hour period. This recommended amount of rest is particularly crucial for commercial drivers, as sleep deprivation significantly impairs reaction time, judgment, and overall driving safety, increasing the risk of accidents.
Which of the following is emergency equipment you should carry with you at all times?
Answer: All of the listed answers.
Commercial motor vehicles are legally required to carry specific emergency equipment to ensure safety on the road. This includes warning devices (such as reflective triangles or flares) to alert other motorists to a parked or disabled vehicle, a fire extinguisher to combat small fires, and spare electrical fuses for essential vehicle systems. Carrying all these items ensures preparedness for various roadside emergencies and compliance with regulations.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy