← All CDL Flashcard Decks

Hazmat Practice Test Flashcards

6 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Hazmat Practice Test flashcards as text
  1. When loading hazardous materials, which class of materials must NEVER be loaded with Class 3 flammable liquids?

    Answer: Class 1 Explosives (Divisions 1.1, 1.2, and 1.3) and certain other incompatible classes

    Class 1 Explosives (Divisions 1.1, 1.2, 1.3) must never be loaded with Class 3 flammable liquids. The flammable liquids could ignite and set off the explosives, causing a catastrophic detonation.

  2. A shipper offers you a package marked with the four-digit number 2448 and the placard 'FLAMMABLE SOLID.' What should you check to verify the load is legal to transport?

    Answer: Verify that your CDL includes the hazmat (H) endorsement and that the shipping papers list the material with all required elements

    Before accepting a hazmat load, the driver must confirm they hold a valid CDL with H endorsement and that the shipping papers contain all required information (ID number, proper shipping name, hazard class, PG, quantity, emergency contact). Flammable solids use Class 4 placards, not Class 3.

  3. What does the 'compatibility group' letter on an explosives placard indicate?

    Answer: The type of explosive article or substance and which other explosives divisions it can safely be transported with

    The compatibility group letter indicates the type of explosive and determines which other explosives it may be transported with. Mixing incompatible groups could cause a sympathetic detonation of the entire load.

  4. Which statement about hazmat placards is TRUE?

    Answer: Placards must be placed on all four sides of the vehicle and be at least 250 mm (9.84 inches) square

    Placards must be placed on the front, rear, and both sides (all four sides) of any vehicle required to be placarded. Each placard must be at least 250 mm (9.84 in.) square, positioned at or near the corners of the vehicle, and visible from the direction it faces.

  5. When is a driver NOT required to stop at a weigh station or agricultural inspection station that has a posted sign saying 'CMV Must Stop'?

    Answer: Never — all drivers of commercial motor vehicles must stop when posted signs require it, unless directed otherwise by an officer

    All commercial motor vehicle drivers must stop at weigh stations and inspection checkpoints when required by posted signs. No federal exemption exists based on empty weight, cargo type, or inspection waiver.

  6. What action must a driver take if the vehicle's hazmat placard is damaged or obscured during transport?

    Answer: Replace or clean the placard as soon as safely possible so it is legible and visible

    Hazmat placards must remain legible and visible throughout the entire trip. If a placard is damaged or obscured while en route, the driver must restore it to a legible condition as soon as safely possible.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. tsa.gov — Fees, renewal · verified Nov 2026
  2. ecfr.gov — Score validity, test delivery, retake policy, passing score · verified Nov 2026