Combination Vehicles Flashcards
10 cards from real CDL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 10 Combination Vehicles flashcards as text
A fully loaded rig is _________ times more likely to roll over in a crash than an empty rig.
Answer: 10
A fully loaded rig has a significantly higher center of gravity and much greater momentum compared to an empty one. This increased mass and higher center of gravity make it far more susceptible to rolling over during sudden maneuvers or impacts. Therefore, the risk of a rollover crash is drastically amplified when the vehicle is fully loaded.
When following behind other vehicles, you should follow
Answer: At least one second for every 10 feet of your vehicle length, plus one second if going over 40 MPH
The 'one second for every 10 feet of vehicle length' rule provides a basic safe following distance. Adding an extra second when traveling over 40 MPH accounts for the increased stopping distance and reduced reaction time at higher speeds. This adjustment ensures adequate space to react and stop safely, especially with a large commercial vehicle.
A trailer jackknife is likely to happen when
Answer: The wheels of the trailer lock up
A trailer jackknife occurs when the trailer pushes the tractor from behind, causing the trailer to swing out to the side. This typically happens when the trailer wheels lock up, losing traction and sliding, while the tractor continues to move forward. The locked trailer wheels act as a pivot point, leading to the dangerous jackknife angle.
What is the fastest and best way to recognize that your trailer has started to skid?
Answer: Seeing it in your mirrors
The fastest and most reliable way to detect a trailer skid is by observing it in your mirrors. You will see the trailer begin to swing out of alignment with the tractor. Relying on feel or sound can be delayed or less distinct, making visual confirmation crucial for timely corrective action.
If your trailer begins to skid, you should
Answer: Release your brakes until the trailer wheels grip the road again
If your trailer begins to skid, the most effective action is to release the brakes. This allows the trailer wheels to unlock and regain traction with the road surface. Once traction is restored, the trailer can straighten out, preventing a jackknife or further loss of control.
Which of the following will help prevent a rollover:
Answer: All of the above
All these actions contribute to preventing rollovers. Keeping cargo centered and low reduces the vehicle's center of gravity, making it more stable. Driving slowly around turns minimizes centrifugal force, which is a primary cause of rollovers for tall or heavy vehicles. Combining these practices significantly enhances stability.
On the trailer air lines of a combination vehicle, the service line connects to the _________ on the trailer to control the pressure to the trailer brakes.
Answer: Relay valves
On a combination vehicle, the service line connects to the relay valves on the trailer. These relay valves are crucial because they quickly send air pressure from the trailer's air tanks to the brake chambers, allowing for faster and more effective braking of the trailer. This system ensures synchronized braking between the tractor and trailer.
On older trailers, what will happen if the emergency and service air lines are crossed?
Answer: You could drive away, but you will not have trailer brakes
If the emergency and service air lines are crossed on an older trailer, the trailer's emergency (spring) brakes will release, but the service brakes will not function. This means you could drive away, but you would have no way to apply the trailer's service brakes. This is a critical safety hazard as the trailer would not contribute to stopping the rig.
When hoses are not in use, why should the trailer gland hands be locked together or attached to dead end or dummy couplers?
Answer: To keep the air supply clean
Locking glad hands together or attaching them to dummy couplers when not in use is essential to keep the air supply clean. This prevents dirt, moisture, and other contaminants from entering the air lines and the trailer's air brake system. Contamination can lead to malfunctions, reduced braking efficiency, and costly repairs.
If the trailer protection valve malfunctions, which of the following may occur?
Answer: A leak or trailer break away could drain all the air from the brake system
The trailer protection valve is designed to prevent a complete loss of air pressure in the tractor's brake system if there's a major leak or breakaway in the trailer. If this valve malfunctions, a leak or a trailer breaking away could indeed drain all the air from the entire brake system, rendering both the tractor and trailer brakes inoperable. This is a critical safety feature.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy