Mixed Deck — All CDCP Topics Flashcards
100 cards from real CDCP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 Mixed Deck — All CDCP Topics flashcards as text
What is Work Recovery Time (WRT)?
Answer: Time after systems are restored to verify data and resume normal operations
WRT is the time needed after technical recovery to check data integrity and bring business processes back to normal.
The following inlet temperature range is advised by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE):
Answer: 68° to 77°
The American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) provides industry standards for data center environments. Their recommended inlet temperature range for IT equipment is 68° to 77°F (20° to 25°C). This range ensures optimal equipment performance and reliability while allowing for energy efficiency in cooling.
What is the primary function of a DCIM (Data Centre Infrastructure Management) system?
Answer: Monitoring and managing physical data centre assets, power, and cooling
DCIM tools provide real-time visibility and management of physical infrastructure including power, cooling, space, and assets.
What is 'N+1 redundancy' in the context of data center cooling systems?
Answer: Having one extra cooling unit beyond the minimum required to handle the full load
N+1 redundancy means one additional cooling unit beyond the number needed (N) to handle full load, so if any single unit fails, the remaining units can still support the entire load.
Which power topology provides the best isolation of IT equipment from utility power anomalies?
Answer: Online double-conversion UPS in VFI mode
Online double-conversion (VFI - Voltage and Frequency Independent) UPS continuously converts AC to DC and back to AC, completely isolating IT loads from all utility disturbances.
What is 'attenuation' in the context of data center cabling, and how is it measured?
Answer: Attenuation is the reduction in signal strength as it travels along a cable, measured in decibels (dB); higher dB loss means weaker signal and potentially failed link performance
Attenuation (insertion loss) is the weakening of a signal as it travels through a medium, expressed in decibels (dB). Every cable, connector, and splice adds attenuation; too much attenuation causes link failures.
The difficulties with data protection include
Answer: Backing up the dynamic data
Backing up dynamic data presents significant challenges because the data is constantly changing. Ensuring data consistency and integrity during the backup process, especially for large databases or applications with continuous transactions, requires sophisticated techniques like snapshots or continuous data protection (CDP). This complexity makes backing up dynamic data a primary difficulty in data protection.
What is the primary benefit of rear-door heat exchangers (RDHx) attached to server rack doors?
Answer: They capture and remove heat directly at the rack exhaust, preventing hot air from entering the room environment
Rear-door heat exchangers use chilled water coils in the rack rear door to absorb server exhaust heat before it enters the room, effectively creating a rack-level heat sink.
What is a 'pre-action' sprinkler system and why might it be preferred over a standard wet-pipe system in a data center?
Answer: A pre-action system keeps pipes dry until both a fire detection signal AND sprinkler head activation occur, reducing the risk of accidental water discharge from mechanical damage or leaks
Pre-action systems keep pipes empty of water until a fire detection signal opens the pre-action valve; water then flows to pipes but only discharges through sprinkler heads that have been thermally activated — requiring two independent events to occur.
What is the difference between 'single-mode' and 'multi-mode' fiber optic cable, and how are they used in data centers?
Answer: Single-mode has a very narrow core (9 microns) for one light path, enabling longer reaches (up to 100km+); multi-mode has a wider core (50 or 62.5 microns) supporting multiple light modes for shorter reaches (up to a few hundred meters) at lower transceiver cost
Single-mode fiber (SMF) has a 9-micron core enabling very long-distance transmission. Multi-mode fiber (MMF) has a 50 or 62.5-micron core, supporting shorter distances at lower transceiver cost — ideal for intra-data center runs.
What is the main purpose of a Business Impact Analysis (BIA)?
Answer: To identify critical processes and the impact of their disruption over time
A BIA identifies critical business functions, their dependencies and the operational and financial impact of losing them over time.
Two redundant components, each with 99% availability, run in parallel and either can carry the load. What is the approximate combined availability?
Answer: 99.99%
Parallel availability is 1 − (0.01 × 0.01) = 0.9999.
What does the 3-2-1 backup rule recommend?
Answer: 3 copies of data, on 2 different media types, with 1 copy offsite
The 3-2-1 rule keeps three copies of data on two types of media, with one copy stored offsite.
Which organization created and promotes the PUE metric for data centers?
Answer: The Green Grid
The Green Grid, an industry consortium founded in 2007, developed the PUE metric to standardize data center energy efficiency measurement globally.
What PUE is allowed with full EconoPhase operation?
Answer: 1.05
EconoPhase is a specific cooling technology, often associated with indirect evaporative cooling or advanced free cooling systems, designed to achieve very high energy efficiency. When operating in full EconoPhase mode, these systems leverage ambient outdoor air or evaporative cooling to minimize or eliminate the use of mechanical refrigeration. This significantly reduces power consumption for cooling, allowing for an extremely low Power Usage Effectiveness (PUE) value, typically around 1.05, indicating near-optimal energy efficiency.
A planned blade deployment would exceed the rack's design power density. What is the most appropriate planning response?
Answer: Spread the load across more racks or add close-coupled cooling and containment
Power and cooling must be matched, so either spread the load out or add targeted cooling capacity for the high-density zone.
Which standard defines the test procedures and performance requirements for UPS systems used in data centers?
Answer: IEC 62040-3
IEC 62040-3 specifies the method of specifying the performance and test requirements for UPS systems, defining classifications like VFI, VI, and VFD.
In the context of data centre power distribution, what does PDU stand for?
Answer: Power Distribution Unit
A PDU (Power Distribution Unit) distributes electrical power from a source to multiple IT equipment loads within a rack or room.
What is the purpose of hot aisle containment (HAC) as opposed to cold aisle containment (CAC)?
Answer: HAC contains the hot exhaust air so it returns directly to cooling units without mixing with room air
Hot aisle containment encloses the hot exhaust aisle, directing hot air directly to CRAC/CRAH return intakes and preventing it from mixing with cold supply air in the room.
What is the key difference between RPO and RTO in a data centre disaster recovery plan?
Answer: RPO is the maximum acceptable data loss; RTO is the maximum acceptable downtime duration
RPO (Recovery Point Objective) defines how much data loss is acceptable, while RTO (Recovery Time Objective) defines how quickly systems must be restored.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- epi-ap.com — Eligibility, exam format, passing score, score validity, retake policy, renewal, test delivery, exam information · verified Oct 2026
- exin.com — Time limit · verified Oct 2026