Data Center Cooling Flashcards
16 cards from real CDCP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 16 Data Center Cooling flashcards as text
What can you do if the top sensor on a rack displays a high temperature alarm?
Answer: Check blanking panel placement
Blanking panels are crucial for maintaining proper airflow within a server rack by preventing hot exhaust air from recirculating into the cold aisle. If a top sensor shows high temperature, it often indicates that hot air is bypassing equipment, possibly due to missing or improperly placed blanking panels. Ensuring all unused rack spaces are sealed with blanking panels directs cool air efficiently through the equipment, preventing hot spots.
What should you check first if your cooling tower alarms for a high water temperature?
Answer: Check to see if fan is running
A cooling tower's primary function is to dissipate heat from water through evaporation, which is facilitated by a large fan drawing air through the tower. If the water temperature is high, the most immediate and critical check is to ensure the fan is operational. A non-functioning fan would prevent proper heat rejection, leading to elevated water temperatures.
What results in a CRAC unit's low-pressure alarm?
Answer: All of the above
A low-pressure alarm in a CRAC unit typically indicates an issue with the refrigerant cycle or airflow. Dirty filters restrict airflow, causing the evaporator coil to run colder and potentially leading to low suction pressure. Loss of refrigerant directly reduces system pressure, while a blower motor failure or improperly adjusted belts would reduce airflow over the coil, impacting heat exchange and causing pressure drops. All these factors can contribute to a low-pressure alarm.
What is the main mechanical distinction between computer room air handlers (CRAHs) and CRACs?
Answer: CRACs have refrigeration compressors as part of their primary system
The fundamental difference between CRACs (Computer Room Air Conditioners) and CRAHs (Computer Room Air Handlers) lies in their cooling mechanism. CRAC units are self-contained refrigeration systems that include their own compressors, condensers, and evaporators to directly cool and dehumidify air. CRAH units, on the other hand, rely on an external chilled water supply from a chiller plant and do not have integrated refrigeration compressors.
Which of the following benefits of "cold aisle confinement" is NOT one of them?
Answer: No need for ‘tile management’
Cold aisle containment aims to separate cold supply air from hot exhaust air, significantly improving cooling efficiency and predictability. While it offers benefits like better temperature control and increased HVAC efficiency, it does not eliminate the need for 'tile management.' Proper placement and type of perforated tiles are still essential to ensure adequate airflow and pressure within the contained cold aisle and to deliver cooling precisely where needed.
What is the main issue with your HVAC system having too little humidity?
Answer: Static build up that can cause major electrical damage
In a data center environment, excessively low humidity (dry air) is a critical concern because it promotes the buildup of static electricity. Static discharge can damage sensitive electronic components within servers and networking equipment, leading to system failures, data corruption, and costly downtime. Maintaining proper humidity levels is essential to mitigate this risk.
What are the most detrimental effects of having an excessive number of perforated tiles in a datacenter?
Answer: It reduces the overall underfloor pressure, while also reducing overall cooling impact
Perforated tiles are designed to direct cool air from the raised floor plenum to specific areas. Having too many perforated tiles, especially in areas not requiring high cooling, causes cool air to escape indiscriminately. This reduces the static pressure within the underfloor plenum, making it harder to deliver sufficient airflow to critical hot spots and ultimately diminishing the overall cooling effectiveness across the data center.
By putting perforated tiles just in the locations you want to direct cooling, raised floor cooling can assist in providing directed cooling. What is the maximum amount of air perforated tiles can supply?
Answer: 500 to 600 CFM
Standard perforated tiles used in raised floor data center cooling systems are designed to deliver a specific range of airflow to server racks. While exact figures can vary by manufacturer and specific tile design, a typical high-flow perforated tile can supply approximately 500 to 600 Cubic Feet per Minute (CFM) of cool air. This effectively directs cooling to high-density equipment.
What follows DOES NOT belong in the "refrigeration cycle"?
Answer: Aeration
The basic refrigeration cycle consists of four main components: the compressor, condenser, expansion valve (or metering device), and evaporator. These components work together to absorb heat from one area and reject it to another using a refrigerant. Aeration, which involves introducing air into a liquid, is not a component or process within the standard vapor-compression refrigeration cycle.
Which one of these supports cooling via a refrigeration cycle?
Answer: All of the above
The refrigeration cycle relies on several principles to achieve cooling. Low boiling point compounds (refrigerants) are essential as they readily change phase to absorb and release heat. Heat transfer dynamics govern how heat moves between the refrigerant and the environment. Heat of compression refers to the heat generated when the refrigerant is compressed, which is then rejected by the condenser. All these factors are integral to the efficient operation of a refrigeration-based cooling system.
What does "heat density" mean in terms of the HVAC system of a data center?
Answer: The temperature average in an area, but not the entire site.
In data center HVAC, 'heat density' refers to the concentration of heat load within a specific area or rack, often measured in kilowatts per rack or per square foot. It represents the average temperature or heat output in a localized zone, rather than the overall average temperature of the entire data center. Understanding heat density is crucial for designing and optimizing cooling strategies for specific hot spots.
What is an example of a compound with a boiling point of 100°F, Compound-X, being in a super heated state?
Answer: Compound-X in a gaseous state with a temperature of 105°F
A superheated state occurs when a substance is heated above its boiling point while remaining in its gaseous phase. For Compound-X with a boiling point of 100°F, being in a gaseous state at 105°F means it has absorbed additional heat beyond what was required for the phase change. This makes it superheated vapor.
What is direct exchange (DX) cooling systems' major benefit?
Answer: Greater cooling capacity due to direct exchange
Direct Exchange (DX) cooling systems use a refrigerant to directly absorb heat from the air and transfer it to an outdoor condenser. This direct heat transfer mechanism, without an intermediate chilled water loop, allows for more efficient and often greater cooling capacity per unit compared to indirect systems. The absence of a secondary heat exchange fluid reduces energy losses and can provide more immediate cooling.
Why might utilizing less compressor cooling be more cost-effective than having a cooler maximum temperature in your datacenter?
Answer: When too hot, Computer systems can ramp up their internal fans which can greatly impact the overall KW used within a datacenter.
While cooler temperatures might seem ideal, maintaining excessively low temperatures requires more energy from CRAC unit compressors, which are significant power consumers. Allowing the data center temperature to be slightly warmer (within ASHRAE guidelines) can reduce the compressor load. More importantly, if the data center becomes too hot, server components will increase their internal fan speeds to prevent overheating, leading to a substantial increase in the overall power consumption of the IT equipment itself, making a slightly warmer, but stable, environment more cost-effective.
What PUE is allowed with full EconoPhase operation?
Answer: 1.05
EconoPhase is a specific cooling technology, often associated with indirect evaporative cooling or advanced free cooling systems, designed to achieve very high energy efficiency. When operating in full EconoPhase mode, these systems leverage ambient outdoor air or evaporative cooling to minimize or eliminate the use of mechanical refrigeration. This significantly reduces power consumption for cooling, allowing for an extremely low Power Usage Effectiveness (PUE) value, typically around 1.05, indicating near-optimal energy efficiency.
Which of the following statements is not a part of the refrigeration cycle?
Answer: When the refrigerant passes through the evaporator the refrigerant transfers its heat to the air and turns into a liquid.
The correct statement is not part of the refrigeration cycle because it misrepresents the evaporator's function. In the evaporator, the refrigerant absorbs heat from the surrounding air, causing it to boil and turn into a low-pressure vapor (gas), not a liquid. The conversion to liquid occurs in the condenser, where heat is rejected.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- epi-ap.com — Eligibility, exam format, passing score, score validity, retake policy, renewal, test delivery, exam information · verified Oct 2026
- exin.com — Time limit · verified Oct 2026