Data Center Cooling Flashcards
7 cards from real CDCP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Data Center Cooling flashcards as text
What is the primary advantage of in-row cooling units compared to traditional perimeter CRAC units?
Answer: They deliver cooling closer to heat sources, reducing air travel distance and improving efficiency
In-row cooling units placed between server racks significantly reduce the distance air must travel, minimizing bypass airflow and improving cooling precision.
Which of the following best describes a chilled water cooling system in a data center?
Answer: A system using chilled water distributed from a chiller plant to cooling units within the data center
Chilled water systems use a central chiller plant to produce cold water, which is then piped to CRAC/CRAH units inside the data center to cool the air.
What is the difference between a CRAC unit and a CRAH unit?
Answer: CRAC uses refrigerant and a compressor; CRAH uses chilled water and a coil
CRAC (Computer Room Air Conditioner) contains its own compressor and refrigerant circuit, while CRAH (Computer Room Air Handler) uses centrally supplied chilled water and has no compressor.
What does 'bypass airflow' mean in a data center cooling context, and why is it problematic?
Answer: Cold supply air that bypasses IT equipment and returns directly to cooling units without doing useful work
Bypass airflow wastes cooling capacity by allowing cold air to return to CRAC units without absorbing heat from servers, forcing the cooling system to work harder.
In liquid cooling for data centers, what is a 'cold plate' system?
Answer: A liquid-cooled metal plate attached directly to high-heat components like CPUs and GPUs
Cold plates are liquid-cooled heat exchangers mounted directly on processors or other hot components, transferring heat to a liquid loop far more efficiently than air cooling.
What is the purpose of hot aisle containment (HAC) as opposed to cold aisle containment (CAC)?
Answer: HAC contains the hot exhaust air so it returns directly to cooling units without mixing with room air
Hot aisle containment encloses the hot exhaust aisle, directing hot air directly to CRAC/CRAH return intakes and preventing it from mixing with cold supply air in the room.
Which factor most directly causes 'hot spots' in a data center despite adequate overall cooling capacity?
Answer: Uneven airflow distribution leading to insufficient cooling at specific rack locations
Hot spots occur when airflow distribution doesn't match local heat loads, even if total cooling capacity is sufficient—high-density racks may not receive enough airflow.