← All CDCP Flashcard Decks

Data Center Power Infrastructure Flashcards

6 cards from real CDCP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Data Center Power Infrastructure flashcards as text
  1. What is the purpose of the automatic transfer switch (ATS) in a data center generator system?

    Answer: To automatically detect utility power failure and transfer the load from the utility to the generator when it reaches stable voltage and frequency

    The ATS monitors utility power and automatically transfers critical loads to the generator output once the generator has reached stable operating voltage and frequency after a utility failure.

  2. What is a 'switchgear' assembly in a data center electrical system and how does it differ from a panelboard?

    Answer: Switchgear is a high-voltage, high-current assembly with individually maintained air or vacuum breakers; panelboards are lower-voltage, lower-current assemblies with molded-case breakers in an enclosed cabinet

    Switchgear handles high voltages and currents (480V–15kV, hundreds of amps or more) with draw-out breakers that can be individually maintained. Panelboards handle lower voltages (120/208V, 240/480V) with fixed molded-case breakers.

  3. What is 'stranded capacity' in the context of data center power planning?

    Answer: Installed power infrastructure (UPS, generators, PDUs) that cannot be used because IT load does not match the available circuits or cannot be densely deployed due to cooling limitations

    Stranded capacity refers to installed power and cooling capacity that cannot be utilized — for example, a PDU circuit that cannot be loaded more because the rack above it is already at its cooling limit.

  4. What is the purpose of a bypass circuit in a UPS system?

    Answer: To allow utility (raw mains) power to bypass the UPS inverter and supply the IT load directly, enabling UPS maintenance without dropping the load

    A UPS bypass allows IT equipment to be fed directly from utility (or static bypass) power while the UPS inverter is taken offline for maintenance, without interrupting the load.

  5. In three-phase electrical distribution, what is the significance of 'neutral current' and why is it relevant in data centers?

    Answer: In balanced three-phase systems the neutral current is near zero, but in data centers with non-linear (switching) loads the neutral can carry significantly more current than each phase, requiring oversized neutral conductors

    Non-linear loads (like computer power supplies) generate harmonic currents, especially 3rd harmonics, which add on the neutral conductor. In data centers this can cause the neutral to overheat unless it is sized at 200% of phase conductors.

  6. What is a 'rotary UPS' and what advantage does it offer compared to a conventional static UPS?

    Answer: A rotary UPS uses a motor-generator flywheel to store kinetic energy and provides isolation from power disturbances; it eliminates chemical batteries, reducing maintenance and hazardous waste

    Rotary (flywheel) UPS systems use a spinning flywheel coupled to a motor-generator to store kinetic energy and supply power during utility disturbances, eliminating the need for VRLA batteries.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. epi-ap.com — Eligibility, exam format, passing score, score validity, retake policy, renewal, test delivery, exam information · verified Oct 2026
  2. exin.com — Time limit · verified Oct 2026