← All CDCP Flashcard Decks

Cooling and Environmental Control Flashcards

6 cards from real CDCP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Cooling and Environmental Control flashcards as text
  1. What is the recommended temperature range for a data center's hot aisle according to ASHRAE A1 guidelines?

    Answer: 64.4°F–80.6°F (18°C–27°C)

    ASHRAE A1 guidelines specify an allowable supply air temperature range of 64.4°F to 80.6°F (18°C to 27°C) for data center equipment.

  2. What does the term 'containment' refer to in data center cooling design?

    Answer: Separating hot exhaust air from cold supply air to improve cooling efficiency

    Containment in data centers refers to the physical separation of hot exhaust air and cold supply air, typically using hot-aisle or cold-aisle containment systems, to improve cooling efficiency.

  3. Which cooling metric measures the ratio of heat removed by a cooling unit to the electrical energy consumed by that unit?

    Answer: Coefficient of Performance (COP)

    Coefficient of Performance (COP) is the ratio of useful cooling provided to the energy consumed by the cooling equipment, indicating how efficiently a cooling system operates.

  4. In a raised-floor data center, perforated tiles are placed in the cold aisle. What is the primary purpose of these tiles?

    Answer: To allow conditioned air from the under-floor plenum to flow up into server intakes

    Perforated tiles allow cool air supplied through the raised-floor plenum to rise into the cold aisle where servers can draw it through their front intakes.

  5. What is 'free cooling' in the context of data center thermal management?

    Answer: Using outside ambient air or water to supplement or replace mechanical refrigeration when conditions allow

    Free cooling uses favorable ambient conditions (cool outside air or water) to provide cooling with minimal mechanical refrigeration, significantly reducing energy consumption.

  6. Which device is commonly installed at the rear of a server rack to supplement in-row cooling?

    Answer: Rear-door heat exchanger (RDHx)

    A rear-door heat exchanger (RDHx) attaches to the back of a server rack and uses chilled water coils to capture heat from server exhaust air before it enters the hot aisle.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. epi-ap.com — Eligibility, exam format, passing score, score validity, retake policy, renewal, test delivery, exam information · verified Oct 2026
  2. exin.com — Time limit · verified Oct 2026