CD Paint Defect Analysis & Correction Flashcards

Which tool is used to measure paint thickness before performing paint correction on a vehicle?

Answer: Paint depth gauge

A paint depth gauge (paint thickness gauge) measures the microns of clear coat remaining so detailers know how safely they can correct defects.

Swirl marks on a vehicle's paint are most commonly caused by which of the following?

Answer: Improper washing technique with dirty mitts or towels

Swirl marks are fine circular scratches caused by dragging dirt across paint during improper washing or drying with contaminated mitts and towels.

What does the term 'buffer trails' refer to in paint correction?

Answer: Holograms or marring left by a rotary polisher

Buffer trails (holograms) are fine swirling marks left in paint when a rotary buffer is used at too high a speed or with too much pressure.

Which type of paint defect cannot be corrected through polishing and requires wet sanding?

Answer: Deep scratches that penetrate through the clear coat

Deep scratches that reach the base coat or primer cannot be leveled by polishing alone and require wet sanding to reduce the scratch before polishing.

What is the purpose of a paint inspection light or LED swirl finder when performing paint correction?

Answer: To reveal surface defects, swirls, and scratches that are invisible in normal lighting

A focused inspection light or swirl finder illuminates the paint at a specific angle, making fine swirls, marring, and scratches clearly visible before and after correction.

When performing a paint correction, why should you work in small sections rather than polishing an entire panel at once?

Answer: To prevent the product from drying before it can be buffed off and to maintain consistent pressure

Working in small sections ensures the compound or polish stays workable and allows you to apply consistent pressure for uniform correction results.