CCS Safety Regulations & Compliance 5

Question 1

What does the acronym 'SDS' stand for in the context of OSHA's Hazard Communication Standard, and how many sections does it contain?

Accepted Answer

Safety Data Sheet; 16 sections

Answer

An SDS (Safety Data Sheet) contains exactly 16 sections following the GHS format adopted in OSHA's HazCom 2012 update.

Question 2

When must a contractor submit an Asbestos Notification to the appropriate federal or state agency before beginning renovation or demolition work?

Accepted Answer

At least 10 working days before commencing work involving regulated asbestos-containing material (RACM)

Answer

EPA NESHAP (40 CFR Part 61 Subpart M) requires at least 10 working days advance notification before renovation or demolition disturbing RACM.

Question 3

Which type of protective system for trenches and excavations involves sloping the walls to reduce the angle of the trench face?

Accepted Answer

Sloping and benching

Answer

Sloping and benching involves cutting back trench walls at a stable angle to prevent cave-in, as defined in OSHA 29 CFR 1926 Subpart P Appendix B.

Question 4

A construction specification references ANSI/ISEA Z87.1. What type of personal protective equipment does this standard govern?

Accepted Answer

Eye and face protection

Answer

ANSI/ISEA Z87.1 is the American National Standard for Occupational and Educational Personal Eye and Face Protection Devices.

Question 5

Under OSHA's electrical safety requirements for construction, what is the minimum clearance required when working near unguarded energized overhead lines rated at 50kV or less?

Accepted Answer

10 feet

Answer

OSHA 29 CFR 1926.1408 requires a minimum 10-foot clearance from unguarded energized overhead lines rated at 50kV or below.

(CCS) Certified Construction Specifier Practice Test

(CCS) Certified Construction Specifier Practice Test

CCS Safety Regulations & Compliance 5