CCS Blueprint Reading & Interpretation 2

Question 1

On a reflected ceiling plan, what does a dashed rectangle typically represent?

Accepted Answer

An overhead cabinet or soffit above the ceiling plane

Answer

Dashed lines on a reflected ceiling plan indicate elements above the ceiling plane, such as overhead cabinets or soffits, which are hidden from the reflected view.

Question 2

What is the purpose of a 'match line' on construction drawings?

Accepted Answer

To show the continuation of a drawing on another sheet

Answer

A match line indicates where a drawing is split across multiple sheets, allowing the reader to align portions on different sheets to reconstruct the full view.

Question 3

In a door schedule, what does the column 'HDW SET' typically reference?

Accepted Answer

A keyed list of hardware items assigned to that door

Answer

HDW SET (hardware set) references a numbered or lettered group of hardware items from a separate hardware schedule that applies to that specific door.

Question 4

Which drawing discipline typically shows the locations of fire dampers in ductwork?

Accepted Answer

Mechanical HVAC plan

Answer

Mechanical HVAC drawings show ductwork routing and the locations of fire dampers, which are required where ducts penetrate fire-rated assemblies.

Question 5

On a site plan, contour lines that are spaced closer together indicate:

Accepted Answer

Steeper slopes

Answer

Closely spaced contour lines represent steep grade changes because each line represents the same elevation interval but covers less horizontal distance.

(CCS) Certified Construction Specifier Practice Test

(CCS) Certified Construction Specifier Practice Test

CCS Blueprint Reading & Interpretation 2