Practice Test Geeks(CCS) Certified Construction Specifier Practice Test
← All CCS Flashcard Decks

Specification Writing Principles & MasterFormat Flashcards

7 cards from real CCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Specification Writing Principles & MasterFormat flashcards as text

  1. Which MasterFormat division covers Heating, Ventilating, and Air Conditioning (HVAC) systems?

    Answer: Division 23

    Division 23 covers HVAC (Heating, Ventilating, and Air Conditioning) systems in the CSI MasterFormat, including air distribution and terminal units.

  2. A 'reference standard' specification requires:

    Answer: Products or workmanship to meet the requirements of a published industry standard

    A reference standard specification requires that products or workmanship meet the requirements of a published industry standard such as ASTM, ANSI, AWS, or ACI.

  3. The CSI 'SectionFormat' is primarily used to:

    Answer: Provide a standardized internal organization for individual specification sections

    SectionFormat provides a standardized structure and sequence for organizing the content within individual specification sections, complementing the MasterFormat numbering system.

  4. What is the purpose of the 'Quality Assurance' article in a specification section?

    Answer: To define the qualifications, certifications, and experience required of the installer

    The Quality Assurance article establishes the qualifications, experience, certifications, and pre-installation requirements needed to ensure that the specified work will be performed to the required standard.

  5. Which MasterFormat division covers Electrical systems?

    Answer: Division 26

    Division 26 covers Electrical systems in the CSI MasterFormat, including low-voltage distribution, lighting, branch wiring, and grounding.

  6. In specification writing, a 'performance specification' is best described as one that:

    Answer: States the required results or criteria a product or system must achieve

    A performance specification defines the required end results, criteria, or operational characteristics that the product or system must achieve, leaving the means and methods to the contractor.

  7. In the CSI three-part section format, Part 3 'Execution' typically includes:

    Answer: Examination, preparation, installation, and field quality control

    Part 3 'Execution' covers field-related activities including examination of existing conditions, surface preparation, installation methods, field quality control testing, cleaning, and protection of completed work.