Practice Test Geeks(CCS) Certified Construction Specifier Practice Test
← All CCS Flashcard Decks

Specification Writing Principles & MasterFormat Flashcards

7 cards from real CCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Specification Writing Principles & MasterFormat flashcards as text

  1. What is the primary purpose of CSI MasterFormat in construction specifications?

    Answer: To provide a standardized numbering system for organizing construction documents

    CSI MasterFormat provides a standardized numbering and titling system for organizing construction specifications and other project information across the industry.

  2. Which MasterFormat division covers Concrete work?

    Answer: Division 03

    Division 03 covers Concrete in the CSI MasterFormat system, including cast-in-place concrete, precast concrete, and concrete forming and reinforcing.

  3. In the CSI three-part section format, Part 1 is titled:

    Answer: General

    Part 1 of the CSI three-part section format is titled 'General' and covers administrative requirements, submittals, quality assurance, and warranty provisions.

  4. A prescriptive specification describes:

    Answer: The specific materials, products, and installation methods to be used

    A prescriptive (also called descriptive) specification details the exact materials, products, and methods to be used, leaving little discretion to the contractor.

  5. Which MasterFormat division is designated for General Requirements applicable to the entire project?

    Answer: Division 01

    Division 01 covers General Requirements, which apply to the entire project and include administrative provisions, quality requirements, temporary facilities, and closeout procedures.

  6. What is a proprietary specification?

    Answer: A specification that names a specific manufacturer's product

    A proprietary specification identifies a specific manufacturer's product by brand name, model number, or catalog designation, limiting acceptable products to that specific item.

  7. In the CSI three-part section format, Part 2 covers:

    Answer: Products, materials, fabrication, and mixes

    Part 2 'Products' covers the materials, manufactured units, fabrication requirements, mixes, and accessories specified for the work.