CCP Cx Process & ASHRAE Guideline 0 2

Question 1

According to ASHRAE Guideline 0, who is responsible for developing the Owner's Project Requirements (OPR)?

Accepted Answer

The owner with assistance from the CxA

Answer

ASHRAE Guideline 0 assigns responsibility for developing the OPR to the owner, typically with facilitation and assistance from the commissioning authority.

Question 2

During which commissioning phase is the Systems Manual first compiled?

Accepted Answer

Construction phase

Answer

The Systems Manual begins to be compiled during the construction phase as equipment is installed and tested, then finalized before occupancy.

Question 3

What is the primary purpose of the Basis of Design (BOD) document in the Cx process?

Accepted Answer

To document the design intent and assumptions that fulfill the OPR

Answer

The BOD documents the design engineer's reasoning, assumptions, and technical approach used to satisfy the Owner's Project Requirements.

Question 4

Which statement best describes the role of 'deferred commissioning' under ASHRAE Guideline 0?

Accepted Answer

Formal Cx tasks that cannot be completed before occupancy and are scheduled for a defined future date

Answer

Deferred commissioning refers to Cx activities that cannot be completed before occupancy but are formally documented and scheduled to occur at a specified future date.

Question 5

In the ASHRAE Guideline 0 Cx process, what document formally records deficiencies found during testing?

Accepted Answer

Issues Log

Answer

The Issues Log (also called a Deficiency Log) tracks all problems identified during commissioning, including their status and resolution.

(CCP) Certified Commissioning Professional Practice Test

(CCP) Certified Commissioning Professional Practice Test

CCP Cx Process & ASHRAE Guideline 0 2