CC Building Codes and Permit Procedures 1

Question 1

What is the primary purpose of building codes in the US?

Accepted Answer

To establish minimum standards for safety, health, and welfare in construction

Answer

Building codes set the minimum safety and construction standards that protect occupants and the public from structural failures, fire, and other hazards.

Question 2

Which model building code is most widely adopted by US states for residential construction?

Accepted Answer

International Residential Code (IRC)

Answer

The IRC, published by the International Code Council (ICC), is the most widely adopted model code for one- and two-family residential construction in the US.

Question 3

What is the role of a building inspector on a construction project?

Accepted Answer

To verify that construction work complies with approved plans and applicable building codes

Answer

Building inspectors review work at key stages to ensure it meets code requirements before it is concealed or built upon.

Question 4

Which inspection is typically performed BEFORE pouring a concrete foundation?

Accepted Answer

Footing or foundation inspection

Answer

A footing inspection verifies that the excavation, forms, and rebar placement meet code before concrete is poured and the work is concealed.

Question 5

What happens if a contractor begins work before obtaining the required building permit?

Accepted Answer

The contractor may face stop-work orders, fines, and required demolition of unpermitted work

Answer

Building without a permit is a code violation that can result in stop-work orders, financial penalties, and in some cases, mandatory removal of non-compliant construction.

CC - Contractor Certificate Practice Test

CC - Contractor Certificate Practice Test

CC Building Codes and Permit Procedures 1