SBE Certified Broadcast Technologist Exam — Questions and Answers

Question 1: Which video standard is primarily used in North America for analog broadcasting?

SECAM
PAL
NTSC (Correct answer)
SDI

Correct answer: NTSC

NTSC (National Television System Committee) is the analog television standard traditionally used in North America.

Question 2: Which Quality of Service (QoS) mechanism is most critical for prioritizing time-sensitive media traffic in a broadcast IP network?

NAT (Network Address Translation)
MAC address filtering
DNS (Domain Name System) priority queuing
DSCP (Differentiated Services Code Point) marking (Correct answer)

Correct answer: DSCP (Differentiated Services Code Point) marking

DSCP marking classifies packets so network switches and routers can prioritize media traffic, ensuring low latency and minimal jitter for time-sensitive video and audio streams.

Question 3: A broadcast engineer is specifying a transfer switch for a critical facility. What feature ensures the switch does NOT simultaneously connect utility and generator power?

Solid-state relay control
Mechanically interlocked contacts preventing parallel operation (Correct answer)
Open-transition switching timing relay
Bypass isolation capability

Correct answer: Mechanically interlocked contacts preventing parallel operation

Mechanical interlocks physically prevent both utility and generator contacts from closing simultaneously, eliminating the risk of back-feeding the utility or damaging the generator.

Question 4: A new regulation impacts broadcast transmission and equipment procedures. What should a CBT professional do first?

Interpreting regulations loosely to allow maximum flexibility
Complying only with regulations that have enforcement mechanisms
Delegating compliance oversight to administrative staff
Ensuring compliance with current regulatory requirements and standards (Correct answer)

Correct answer: Ensuring compliance with current regulatory requirements and standards

Ensuring compliance with current regulatory requirements and standards is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 5: In broadcast risk management, what does a 'risk register' document?

An inventory of identified risks, their likelihood, impact, and mitigation status (Correct answer)
Personnel certifications and training records
A log of all on-air technical violations
FCC license renewal dates and fees

Correct answer: An inventory of identified risks, their likelihood, impact, and mitigation status

A risk register is the central repository for all identified risks, tracking probability, impact, owner, mitigation actions, and current status for ongoing risk management.

Question 6: What is the FCC's 'main studio rule' requirement for broadcast stations?

Every studio must have a licensed Chief Operator on duty 24/7
All stations must maintain a staffed studio within the city of license
Stations must have a main studio located within or reasonably near the principal community they serve (Correct answer)
Main studios must be co-located with the transmitter site

Correct answer: Stations must have a main studio located within or reasonably near the principal community they serve

The FCC's main studio rule historically required a studio within or near the community of license, though this rule was eliminated in 2017, replacing it with a public file requirement.

Question 7: Which type of modulation is most commonly used in FM broadcasting?

Frequency Modulation (Correct answer)
Amplitude Modulation
Phase Modulation
Pulse Modulation

Correct answer: Frequency Modulation

FM broadcasting uses frequency modulation, where the frequency of the carrier signal varies with the amplitude of the input signal.

Question 8: What happens to total resistance when resistors are added in parallel?

Total resistance increases
Total resistance becomes infinite
Total resistance decreases (Correct answer)
Total resistance remains unchanged

Correct answer: Total resistance decreases

Adding resistors in parallel decreases the total resistance because the current has multiple paths to flow.

Question 9: What kind of waveform is typically produced by an AC generator?

Square wave
Sinusoidal wave (Correct answer)
Sawtooth wave
Triangular wave

Correct answer: Sinusoidal wave

AC generators produce a sinusoidal waveform, which represents alternating current varying smoothly over time.

Question 10: In a broadcast studio, what is a 'hot mic' situation?

A condenser microphone with a sensitivity above -30 dBV/Pa
A microphone requiring phantom power above 48V
A radio frequency microphone operating in the hot zone near an RF transmitter
A microphone that is open and transmitting audio to the broadcast chain without the talent's awareness (Correct answer)

Correct answer: A microphone that is open and transmitting audio to the broadcast chain without the talent's awareness

A hot mic is an active, open microphone that is live in the signal chain, potentially capturing and broadcasting audio the talent does not intend to be heard.

Question 11: Which scenario would require a broadcast technician professional to escalate a electronic fundamentals concern?

Collecting feedback only during formal review periods
Using feedback solely for personnel evaluations
Creating feedback mechanisms that encourage continuous improvement (Correct answer)
Discouraging critical feedback to maintain team morale

Correct answer: Creating feedback mechanisms that encourage continuous improvement

Creating feedback mechanisms that encourage continuous improvement is the correct approach because effective electronic fundamentals in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 12: What is the recommended frequency for reviewing and updating broadcast transmission and equipment protocols?

Monitoring outcomes through regular data collection and trend analysis (Correct answer)
Relying on periodic external audits as the sole evaluation method
Tracking activity volume without measuring quality
Reviewing results only at year-end

Correct answer: Monitoring outcomes through regular data collection and trend analysis

Monitoring outcomes through regular data collection and trend analysis is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 13: Which unit is used to measure electrical capacitance?

Henries
Watts
Ohms
Farads (Correct answer)

Correct answer: Farads

Capacitance is measured in farads (F), representing the ability of a component to store electrical charge.

Question 14: In audio distribution, what is the standard nominal signal level for professional broadcast equipment?

0 dBFS
+4 dBu (Correct answer)
-20 dBFS
-10 dBV

Correct answer: +4 dBu

+4 dBu is the standard nominal operating level for professional broadcast audio equipment, providing adequate headroom above noise while avoiding clipping.

Question 15: In the context of broadcast technician, which principle most directly governs broadcast transmission and equipment practices?

Applying evidence-based methodologies with peer-reviewed support (Correct answer)
Following popular trends without evaluating their applicability
Relying exclusively on vendor-provided solutions
Using trial-and-error without systematic documentation

Correct answer: Applying evidence-based methodologies with peer-reviewed support

Applying evidence-based methodologies with peer-reviewed support is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 16: During a professional ethics & standards audit, which documentation is most critical to have readily available?

Conducting root cause analysis to identify underlying systemic issues (Correct answer)
Addressing symptoms without investigating deeper causes
Blaming individual team members for process failures
Accepting recurring problems as unavoidable

Correct answer: Conducting root cause analysis to identify underlying systemic issues

Conducting root cause analysis to identify underlying systemic issues is the correct approach because effective professional ethics & standards in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 17: In the context of broadcast technician, which principle most directly governs audio and video systems practices?

Applying evidence-based methodologies with peer-reviewed support (Correct answer)
Using trial-and-error without systematic documentation
Relying exclusively on vendor-provided solutions
Following popular trends without evaluating their applicability

Correct answer: Applying evidence-based methodologies with peer-reviewed support

Applying evidence-based methodologies with peer-reviewed support is the correct approach because effective audio and video systems in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 18: What is the primary function of a microphone in an audio system?

Transmit RF signals
Convert sound into electrical signals (Correct answer)
Store recorded signals
Convert electrical signals to light

Correct answer: Convert sound into electrical signals

A microphone converts acoustic sound waves into electrical signals for further processing in an audio chain.

Question 19: In a broadcast IP environment, what is the primary function of a Network Interface Card (NIC) with hardware timestamping support?

To increase the NIC's data throughput capacity
To encrypt outgoing media streams at the hardware level
To compress video before it enters the network
To generate accurate PTP timestamps for precise clock synchronization (Correct answer)

Correct answer: To generate accurate PTP timestamps for precise clock synchronization

Hardware timestamping on NICs enables highly accurate PTP (IEEE 1588) synchronization by timestamping packets in hardware rather than software, reducing jitter and improving timing precision.

Question 20: What is the role of an audio mixer in a studio environment?

Increase microphone signal strength only
Transmit RF signals to antenna
Select video camera feeds
Blend and route multiple audio signals (Correct answer)

Correct answer: Blend and route multiple audio signals

An audio mixer combines multiple audio inputs, adjusts levels, and routes audio to different outputs.

Question 21: Which tool or methodology is most appropriate for analyzing broadcast transmission and equipment outcomes?

Maintaining professional boundaries while building collaborative relationships (Correct answer)
Maintaining strict formality that inhibits collaboration
Prioritizing relationships over professional standards
Adjusting boundaries based on individual situations without guidelines

Correct answer: Maintaining professional boundaries while building collaborative relationships

Maintaining professional boundaries while building collaborative relationships is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 22: What does the acronym SDN stand for in the context of modern broadcast facilities, and what is its benefit?

Synchronized Data Network — ensures all data arrives in order
Signal Distribution Node — a hardware hub for routing video
Standard Delivery Node — a fixed signal routing point
Software-Defined Networking — allows network configuration and routing via software rather than manual hardware configuration (Correct answer)

Correct answer: Software-Defined Networking — allows network configuration and routing via software rather than manual hardware configuration

Software-Defined Networking (SDN) centralizes network control in software, allowing broadcast engineers to dynamically reconfigure routing, bandwidth, and policies without physically touching switch hardware.

Question 23: In broadcast IP networks, what does PTP stand for and what is it used for?

Primary Transport Path — defining the main data route
Packet Transfer Protocol — routing media packets
Parallel Transmission Protocol — sending redundant streams
Precision Time Protocol — synchronizing clocks across network devices (Correct answer)

Correct answer: Precision Time Protocol — synchronizing clocks across network devices

PTP (Precision Time Protocol, IEEE 1588) synchronizes clocks across network devices to sub-microsecond accuracy, which is critical for maintaining timing in IP broadcast systems.

Question 24: A stakeholder questions the value of professional ethics & standards initiatives. Which response best demonstrates ROI?

Centralizing accountability with a single individual
Building a culture of accountability with transparent reporting (Correct answer)
Distributing accountability so widely that no one is responsible
Avoiding accountability discussions to prevent conflict

Correct answer: Building a culture of accountability with transparent reporting

Building a culture of accountability with transparent reporting is the correct approach because effective professional ethics & standards in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 25: What is the purpose of a production switcher (vision mixer) in a broadcast studio?

To synchronize teleprompter scripts with camera positions
To control lighting intensity across studio zones
To route audio signals between studio microphones
To select and transition between multiple video sources for on-air output (Correct answer)

Correct answer: To select and transition between multiple video sources for on-air output

A production switcher allows the technical director to select, mix, and transition between multiple camera and source inputs, producing the final composite program output.

Question 26: Which color space model is most commonly used in digital broadcast video production?

HSV
YCbCr (Correct answer)
RGB
CMYK

Correct answer: YCbCr

YCbCr separates luminance (Y) from color difference components (Cb and Cr), allowing efficient bandwidth use in broadcast systems by exploiting human visual sensitivity.

Question 27: Which scenario would require a broadcast technician professional to escalate a fcc rules, safety & operational standards concern?

Discouraging critical feedback to maintain team morale
Collecting feedback only during formal review periods
Creating feedback mechanisms that encourage continuous improvement (Correct answer)
Using feedback solely for personnel evaluations

Correct answer: Creating feedback mechanisms that encourage continuous improvement

Creating feedback mechanisms that encourage continuous improvement is the correct approach because effective fcc rules, safety & operational standards in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 28: A broadcast tower crew identifies a cracked weld on a guy wire anchor during routine inspection. In a risk management framework, this finding should be classified as:

Moderate risk—document and inspect again next quarter
Low risk—visible and already monitored
High risk—structural failure could cause catastrophic tower collapse (Correct answer)
No risk—guy wires have safety redundancy built in

Correct answer: High risk—structural failure could cause catastrophic tower collapse

A cracked guy wire anchor is a structural integrity failure that can lead to catastrophic tower collapse, endangering personnel and causing total loss of broadcast infrastructure.

Question 29: What is the most common mistake professionals make when implementing fcc rules, safety & operational standards strategies?

Creating contingency plans for every possible scenario regardless of probability
Responding to problems only after they occur
Developing contingency plans for high-probability risk scenarios (Correct answer)
Transferring all risk to external partners through contracts

Correct answer: Developing contingency plans for high-probability risk scenarios

Developing contingency plans for high-probability risk scenarios is the correct approach because effective fcc rules, safety & operational standards in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 30: Which component converts electrical video signals into visible light on a display?

Video switcher
RF Modulator
Display monitor (Correct answer)
Time base corrector

Correct answer: Display monitor

A video display such as an LED or LCD screen takes electronic video signals and transforms them into images visible to the human eye.

Question 31: What does 'signal quality monitoring' in a broadcast facility typically measure?

Parameters such as video levels, audio levels, sync presence, and RF output to ensure on-air quality (Correct answer)
Exclusively the ratings performance of programming
Only the audio levels going to the transmitter
The number of viewer complaints received per broadcast hour

Correct answer: Parameters such as video levels, audio levels, sync presence, and RF output to ensure on-air quality

Signal quality monitoring in broadcast facilities tracks video levels, audio loudness, sync integrity, and RF parameters to ensure continuous compliant on-air operation.

Question 32: A new regulation impacts audio and video systems procedures. What should a CBT professional do first?

Complying only with regulations that have enforcement mechanisms
Delegating compliance oversight to administrative staff
Interpreting regulations loosely to allow maximum flexibility
Ensuring compliance with current regulatory requirements and standards (Correct answer)

Correct answer: Ensuring compliance with current regulatory requirements and standards

Ensuring compliance with current regulatory requirements and standards is the correct approach because effective audio and video systems in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 33: What is the function of a routing switcher in a broadcast facility?

To switch between live and pre-recorded content automatically
To route any input source to any output destination under control room command (Correct answer)
To combine multiple video streams into a single mosaic display
To provide redundant power distribution for critical equipment

Correct answer: To route any input source to any output destination under control room command

A routing switcher is a matrix device that connects any of its signal inputs to any of its outputs on command, providing flexible signal path management across a broadcast facility.

Question 34: What component is used to match the impedance between a transmitter and an antenna?

Modulator
Amplifier
Antenna tuner (Correct answer)
Low-pass filter

Correct answer: Antenna tuner

A transmission line or matching network ensures maximum power transfer by matching the impedance of the transmitter to the antenna.

Question 35: During a live national broadcast feed, an affiliate station technician notices sync errors in the incoming signal. The MOST effective first communication step is to:

Notify the local program director and let them decide whether to call the network
Wait 10 minutes to see if the problem self-corrects before calling
Post a technical alert on the station's internal ticketing system and await a response
Contact the network operations center (NOC) immediately with the specific error type, time of onset, and signal path details (Correct answer)

Correct answer: Contact the network operations center (NOC) immediately with the specific error type, time of onset, and signal path details

NOC personnel have end-to-end visibility into the signal path and can identify whether the issue is at the source, the uplink, or the downlink—but they need specific diagnostic data to act quickly.

Question 36: Which scenario would require a broadcast technician professional to escalate a broadcast transmission and equipment concern?

Discouraging critical feedback to maintain team morale
Using feedback solely for personnel evaluations
Creating feedback mechanisms that encourage continuous improvement (Correct answer)
Collecting feedback only during formal review periods

Correct answer: Creating feedback mechanisms that encourage continuous improvement

Creating feedback mechanisms that encourage continuous improvement is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 37: A broadcast technician professional discovers a discrepancy during communication & stakeholder engagement review. What is the most appropriate immediate action?

Engaging stakeholders collaboratively to align goals and expectations (Correct answer)
Accepting all stakeholder requests without prioritization
Working independently to avoid conflicting opinions
Limiting communication to written reports only

Correct answer: Engaging stakeholders collaboratively to align goals and expectations

Engaging stakeholders collaboratively to align goals and expectations is the correct approach because effective communication & stakeholder engagement in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 38: What is the purpose of a station’s public inspection file?

Document transmitter repairs
Store internal memos
Provide access to licensing and compliance info (Correct answer)
Display music playlists

Correct answer: Provide access to licensing and compliance info

The public file ensures transparency, giving the public access to licensing, ownership, and compliance records.

Question 39: In the context of broadcast technician, which principle most directly governs fcc rules, safety & operational standards practices?

Applying evidence-based methodologies with peer-reviewed support (Correct answer)
Following popular trends without evaluating their applicability
Using trial-and-error without systematic documentation
Relying exclusively on vendor-provided solutions

Correct answer: Applying evidence-based methodologies with peer-reviewed support

Applying evidence-based methodologies with peer-reviewed support is the correct approach because effective fcc rules, safety & operational standards in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 40: What is the purpose of a 'facilities check' or 'proof of performance' test in broadcast engineering?

To measure and document that broadcast equipment meets performance specifications (Correct answer)
To test emergency backup power systems under load conditions
To confirm that all studio equipment meets OSHA safety standards
To verify a station's transmitter output power meets FCC licensed parameters

Correct answer: To measure and document that broadcast equipment meets performance specifications

A proof of performance test documents that broadcast equipment meets manufacturer and regulatory performance specifications, often required for FCC compliance.

Question 41: What is the role of inductance in an AC circuit?

Opposes changes in current (Correct answer)
Filters noise signals
Reduces voltage
Increases resistance

Correct answer: Opposes changes in current

Inductance resists changes in current and causes a phase shift between voltage and current in AC circuits.

Question 42: When writing a technical incident report for non-technical management after a broadcast outage, the technician should primarily focus on:

Vendor part numbers and firmware version logs
FCC rule citations and compliance documentation
Detailed RF propagation calculations and equipment schematics
Business impact, timeline, and corrective actions taken (Correct answer)

Correct answer: Business impact, timeline, and corrective actions taken

Non-technical stakeholders need to understand the business impact, what happened chronologically, and what steps were taken—not the underlying technical details.

Question 43: What does 'A/B roll editing' refer to in broadcast post-production?

A dual-operator editing workflow where an A editor and a B editor work simultaneously
The process of rolling back tape to find an in-point during linear editing
Alternating between two tape machines or timeline tracks to create transitions and effects between sources (Correct answer)
Editing audio on one track while video edits are made independently on another

Correct answer: Alternating between two tape machines or timeline tracks to create transitions and effects between sources

A/B roll editing uses two source reels or timeline tracks (A and B) so that transitions like dissolves and wipes can be created between them, forming the foundation of non-linear editing workflows.

Question 44: What is the purpose of a studio floor manager during a live broadcast?

To control camera movements via remote robotic heads
To operate the production switcher from the studio floor
To relay director's cues to talent and manage studio floor activity (Correct answer)
To monitor audio levels for all studio microphones

Correct answer: To relay director's cues to talent and manage studio floor activity

The floor manager acts as the director's representative on the studio floor, relaying cues, countdowns, and instructions to talent and crew who cannot hear the control room intercom.

Question 45: What is the most common mistake professionals make when implementing broadcast transmission and equipment strategies?

Creating contingency plans for every possible scenario regardless of probability
Developing contingency plans for high-probability risk scenarios (Correct answer)
Responding to problems only after they occur
Transferring all risk to external partners through contracts

Correct answer: Developing contingency plans for high-probability risk scenarios

Developing contingency plans for high-probability risk scenarios is the correct approach because effective broadcast transmission and equipment in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

Question 46: What should be done before performing maintenance on a broadcast transmitter?

Switch to standby audio
Change frequency temporarily
Announce it on-air
Power down and lock out equipment (Correct answer)

Correct answer: Power down and lock out equipment

To ensure technician safety, transmitters should be powered down and locked out to prevent accidental energizing.

Question 47: What is a 'chroma key' (green screen) technique used for in broadcast production?

Keying in lower-third graphics over a transparent channel
Synchronizing chroma phase between multiple cameras
Replacing a solid-color background with a different video source in real time (Correct answer)
Measuring the color accuracy of studio cameras against a reference chart

Correct answer: Replacing a solid-color background with a different video source in real time

Chroma key electronically removes a specific color (typically green or blue) from a foreground image and replaces it with another video source, enabling virtual sets and weather map backgrounds.

Question 48: Which FCC rule most directly governs a broadcast technician's responsibility to operate transmitters only within authorized parameters?

Part 15 — Unlicensed Operations
Part 80 — Maritime Communications
Part 97 — Amateur Radio
Part 73 — Commercial Broadcast Stations (Correct answer)

Correct answer: Part 73 — Commercial Broadcast Stations

FCC Part 73 establishes the technical standards and operational requirements for commercial broadcast stations, including transmitter operation limits.

Question 49: What is the purpose of the AMWA (Advanced Media Workflow Association) IS-05 specification?

Providing a RESTful API for making and breaking connections between NMOS-compatible devices (Correct answer)
Defining the color space metadata transported over IP
Specifying power requirements for broadcast network switches
Defining compressed video codec parameters for IP transport

Correct answer: Providing a RESTful API for making and breaking connections between NMOS-compatible devices

AMWA IS-05 (Device Connection Management) defines a RESTful API for connecting and disconnecting senders and receivers in an NMOS-compatible IP broadcast environment.

Question 50: What is Ohm’s Law used to calculate in electrical circuits?

Phase angle
Magnetic field strength
Voltage, current, and resistance (Correct answer)
Power factor

Correct answer: Voltage, current, and resistance

Ohm’s Law describes the relationship between voltage (V), current (I), and resistance (R), defined as V = IR.

Question 51: What does the term 'SDI' refer to in video systems?

Secure Device Interface
Standard Data Interface
Serial Digital Interface (Correct answer)
Signal Delay Input

Correct answer: Serial Digital Interface

SDI (Serial Digital Interface) is a digital video interface standard used to transmit uncompressed digital video signals over coaxial cable.

Question 52: Which connector is commonly used for professional analog audio?

XLR (Correct answer)
BNC
USB
HDMI

Correct answer: XLR

The XLR connector is the standard for balanced analog audio in professional environments, offering noise rejection and secure connection.

Question 53: What is the purpose of a diode in a circuit?

Allows current to flow in one direction (Correct answer)
Blocks all current flow
Amplifies electrical signals
Stores electrical energy

Correct answer: Allows current to flow in one direction

A diode allows current to flow in one direction only, acting as a one-way valve in electronic circuits.

Question 54: In the context of broadcast technician, which principle most directly governs electronic fundamentals practices?

Using trial-and-error without systematic documentation
Relying exclusively on vendor-provided solutions
Following popular trends without evaluating their applicability
Applying evidence-based methodologies with peer-reviewed support (Correct answer)

Correct answer: Applying evidence-based methodologies with peer-reviewed support

Applying evidence-based methodologies with peer-reviewed support is the correct approach because effective electronic fundamentals in the broadcast technician field requires adherence to professional standards, evidence-based practices, and systematic methodology. This approach ensures consistent, high-quality outcomes while maintaining professional accountability.

SBE Certified Broadcast Technologist Exam

The SBE Certified Broadcast Technologist (CBT) exam validates foundational knowledge in broadcast engineering, covering electronic fundamentals, audio/video systems, RF transmission, FCC regulations, and studio operations.

Questions

180 min

Time Limit

70%

To Pass

Checking for saved progress...

Exam Rules

You can skip questions and return to them later
Flag questions for review before submitting
No feedback shown until you submit the entire exam
Unanswered questions count as wrong — answer everything
10 pretest questions are mixed in and don't affect your score
Timer auto-submits when time runs out
Your progress is auto-saved every 30 seconds