Prescribed Burn Planning & Implementation Flashcards
7 cards from real CBM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Prescribed Burn Planning & Implementation flashcards as text
Which section of a prescribed burn plan documents the minimum and maximum weather parameters under which the burn may proceed?
Answer: Prescription window
The prescription window defines the acceptable range of weather parameters (wind speed, relative humidity, temperature, ERC) that must be met before ignition.
A burn boss determines that smoke from a planned burn will impact a Class I airshed. What is the MOST appropriate action?
Answer: Cancel or reschedule the burn to avoid Class I area impacts
Class I airsheds receive the highest level of air quality protection, and burns that would significantly impact them should be cancelled or rescheduled.
What is the primary purpose of conducting a test fire at the start of a prescribed burn?
Answer: To verify actual fire behavior matches prescription predictions before full ignition
A test fire validates that fire behavior, smoke dispersal, and fuel moisture conditions actually match what was predicted in the burn plan.
During a prescribed burn, a crew member reports that fire intensity has doubled in the past 15 minutes with no change in weather. What should the burn boss consider first?
Answer: Possible shift in fine fuel moisture or undetected fuel continuity
Unexpected increases in fire intensity often indicate that actual fuel moisture or fuel loading differs from plan assumptions, requiring immediate reassessment.
Which ignition technique is BEST suited for backing fires to maintain low intensity under prescription in heavy fuel loads?
Answer: Flank ignition from the downwind end toward the wind
Backing fires ignited from the downwind end burn against the wind at lower intensity, making them more controllable in heavy fuels.
What does the term 'holding resources' refer to in prescribed burn implementation?
Answer: Personnel and equipment positioned to prevent fire escape
Holding resources are the personnel and equipment strategically positioned along control lines to detect and suppress any fire escape before it breaches the perimeter.
A prescribed burn plan calls for a smoke-sensitive receptor within 1 mile of the burn unit. Which plan element MOST directly addresses this concern?
Answer: Smoke management plan specifying wind direction requirements and notification procedures
The smoke management plan identifies sensitive receptors, specifies acceptable wind directions to carry smoke away, and details public notification requirements.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- oregon.gov — Eligibility, retake policy, score validity, fees · verified Nov 2026
- mfc.ms.gov — Eligibility, fees, passing score · verified Nov 2026