CAT Alarm Technician Compliance Standards 3

Question 1

Which NFPA standard specifically addresses the installation and testing of fire alarm and signaling systems?

Accepted Answer

NFPA 72

Answer

NFPA 72, the National Fire Alarm and Signaling Code, specifically covers installation, testing, and maintenance of fire alarm systems.

Question 2

What is the purpose of a Certificate of Completion required by NFPA 72 after a fire alarm system installation?

Accepted Answer

It documents that the system was installed and tested per the applicable standard

Answer

The Certificate of Completion documents that the fire alarm system was installed, tested, and verified to meet the requirements of NFPA 72.

Question 3

Under most state licensing laws for alarm contractors, which action would likely result in license revocation?

Accepted Answer

Installing a system without a permit in a jurisdiction that requires one

Answer

Installing an alarm system without a required permit is a serious violation that can lead to license suspension or revocation under state contractor licensing laws.

Question 4

In the context of alarm industry compliance, what does 'false alarm reduction' ordinances primarily regulate?

Accepted Answer

The fees and penalties assessed to properties with excessive false alarms

Answer

False alarm reduction ordinances typically impose fines or service fees on premises that generate excessive false alarms to incentivize proper system maintenance.

Question 5

According to NFPA 72, how often must a fire alarm system initiating device (such as a smoke detector) undergo sensitivity testing?

Accepted Answer

Within 1 year of installation and every 2 years thereafter

Answer

NFPA 72 requires sensitivity testing of smoke detectors within the first year of installation and at least every two years after that.

(CAT) Certified Alarm Technician Level I Practice Test

(CAT) Certified Alarm Technician Level I Practice Test

CAT Alarm Technician Compliance Standards 3